rec.sport.unicycling archive · Public discussion

USA Nationals

Started by Elmer · · Last activity · 4 posts · 1,388 views

Thread details

What we know about this thread

Original section
rec.sport.unicycling archive
Published
5 July 2004
Last activity
5 July 2004
Original author
Elmer
Posts
4
Discussion status
Public discussion
Total views
1,388
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. I'm planning to attend the USA Nationals in Salt Lake City
    in July with my five kids, aged 10-15, and have a few
    questions.

    Will there be beginners categories?

    What kind of unicycles should I bring? I'm thinking at least
    a few of them will want to race. Is there a standard type,
    crank length, wheel diam. etc?

    We own mostly trials and muni rigs. Will we need others with
    plastic pedals etc.?

    How about freestyle clinics? We're excited but a little
    nervous about how we'll fit in. Moab has been our only
    organized event thus far!

    --
    elmer - uniimpaired

    "At 40 life begins...to show."
    ------------------------------------------------------------------------
    elmer's Profile: unicyclist.com5193
    View this thread: unicyclist.com32622

  2. Elmer,

    You should go to the Web site for the 2004 North American
    Unicycling Championships and Convention at
    home.earthlink.net~naucc to download the
    registration form. The registration form shows the events
    that will be run along with the age / skill categories
    available for each event. For more details on the age /
    skill categories and the events, you should follow the
    provided links to the USA, Inc.'s Competition Rule Book.

    Briefly:

    - From the Competition Rule Book:

    2.3 UNICYCLES FOR RACING (TRACK: Only standard unicycles may
    be used. A standard unicycle has only one wheel, is driven
    by crank arms directly attached to the axle, and is
    propelled only by human force. Riders may use any number
    of unicycles, as long as all fit within the applicable
    restrictions for events in which they are entered.

    2.1.1 WHEEL SIZE: This is the maximum allowable tire
    diameter. Smaller sizes may be used. Some manufactured
    tires are marked with sizes larger than they actually
    are, but may be within the allowable size limit and
    vice versa.

    For 24" wheels, the outside diameter of the tire may not be
    larger than
    3.333" (61.8 cm).

    For 20" wheels, the outside diameter of the tire may not be
    larger than
    4.333" (51.6 cm).

    For 16" wheels, the outside diameter of the tire may not be
    larger than
    5.333" (41.5 cm).

    If a tire is in question, or has no size marked by its
    manufacturer, its outside diameter must be accurately
    measured.

    5.1.2 CRANK ARM LENGTH: This is the minimum allowable
    length, measured from the center of the wheel axle to
    the center of the pedal axle. Longer sizes may be used.

    - For 24” wheels, crank arms may be no shorter than 5”
    (125mm).

    - For 20” and 16” wheels, crank arms may be no shorter than
    4½” (114mm).

    - For 16” wheels, crank arms may be no shorter than
    100 mm (4”).

    2.4 CLOTHING AND SAFETY EQUIPMENT: Riders are required to
    wear the clothing and equipment below for participation in
    all events of track and field, plus events that may be
    named elsewhere. This applies to all outdoor competition
    events, including Slow races, with no exceptions. The
    referee has final say on whether a rider's safety
    equipment meets definitions. Starters will alert, or
    remove from the starting line, riders not properly
    equipped to compete, including riders with dangerously
    loose shoelaces. Riders completing events with
    insufficient equipment on will be disqualified. Though not
    mandatory in all events, helmets, elbow pads, shirts and
    other safety equipment are recommended.

    2.1.1 BASIC SET: This applies to all track events, plus any
    other track or field event not requiring the full set
    below. The basic set consists of shoes, kneepads, and
    wristguards or gloves meeting the definitions in
    section 1.28.

    2.2.2 FULL SET: This applies to all MUni, Trials, downhill
    racing (gliding), any event that goes backward at
    speed, plus events that may be named elsewhere. The
    full set consists of the basic set, with the
    additional requirement of a helmet. See definitions in
    section 1.28.

    From Section 1.28:

    FOOTWEAR FOR RACING: Shoes with full uppers are required.
    This means the shoe must cover the entire top of the foot.
    Sandals or thongs are not acceptable. Shoelaces must not
    dangle where they can catch in crank arms.

    GLOVES: (For racing) Any glove with thick material covering
    the palms (Leather is acceptable, thin nylon is not). Gloves
    may be fingerless, such as bicycling gloves, provided the
    palm of the hand is completely covered. Wrist guards, such
    as those used with in-line skates, are an acceptable
    alternative to gloves.

    HELMET: Helmets are recommended for all races, and are
    mandatory for some. Helmets must be of bicycle quality (or
    stronger), meeting ANSI, SNELL or ASTM standards for safety.
    No leather “hair nets” or helmets designed for low speed
    sports (football, hockey, etc.) are allowed.

    KNEEPADS: (For racing) Any commercially made, thick version
    is acceptable, such as those used for basketball and
    volleyball, or any with hard plastic caps. Kneepads must
    cover the entire knee and stay on during racing. Long pants,
    ace bandages, patches on knees and band-aids are not
    acceptable.

    - Unicycles need to have non-metal pedals and non-marking
    tires if you wish to use them on the track or in any of
    the indoor venues.

    - We hope to have many different workshops / clinics. Please
    be sure to indicate your ideas on the spaces provided on
    the registration form.

    Tom Daniels President, Unicycling Society of America, Inc.

    --
    tadaniels - USA President
    ------------------------------------------------------------------------
    tadaniels's Profile: unicyclist.com352
    View this thread: unicyclist.com32622

  3. Thanks, Tom. That helped a lot!🙂

    --
    elmer - uniimpaired

    "At 40 life begins...to show."
    ------------------------------------------------------------------------
    elmer's Profile: unicyclist.com5193
    View this thread: unicyclist.com32622

  4. tadaniels said:

    - For 24” wheels, crank arms may be no shorter than 5”
    (125mm).

    - For 20” and 16” wheels, crank arms may be no shorter than
    4½” (114mm).

    - For 16” wheels, crank arms may be no shorter than 100
    mm (4”).

    May I suggest that you use the exact conversion factor (1" =
    25.4 mm) in your official rules. Am I nitpicking? The
    difference is more than
    1.5% and that may be significant in the end result.

    Klaas Bil - Newsgroup Addict
    --
    be sure to remove the saddle and simply sit on the seat
    post. this is far more comfortable - tennisgh22 on the
    comfort of Savage unis

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.