rec.sport.unicycling · Public discussion

USA Nationals

Started by elmer · · Last activity · 4 posts · 289 views

Thread details

What we know about this thread

Original section
rec.sport.unicycling
Published
22 May 2004
Last activity
23 May 2004
Original author
elmer
Posts
4
Discussion status
Public discussion
Total views
289
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. I'm planning to attend the USA Nationals in Salt Lake City in July with
    my five kids, aged 10-15, and have a few questions.

    Will there be beginners categories?

    What kind of unicycles should I bring? I'm thinking at least a few of
    them will want to race. Is there a standard type, crank length, wheel
    diam. etc?

    We own mostly trials and muni rigs. Will we need others with plastic
    pedals etc.?

    How about freestyle clinics? We're excited but a little nervous about
    how we'll fit in. Moab has been our only organized event thus far!

    --
    elmer - uniimpaired

    "At 40 life begins...to show."
    ------------------------------------------------------------------------
    elmer's Profile: http://www.unicyclist.com/profile/5193
    View this thread: http://www.unicyclist.com/thread/32622

  2. Elmer,

    You should go to the Web site for the 2004 North American Unicycling
    Championships and Convention at http://home.earthlink.net/~naucc/ to
    download the registration form. The registration form shows the events
    that will be run along with the age / skill categories available for
    each event. For more details on the age / skill categories and the
    events, you should follow the provided links to the USA, Inc.'s
    Competition Rule Book.

    Briefly:

    - From the Competition Rule Book:

    2.3 UNICYCLES FOR RACING (TRACK: Only standard unicycles may be used. A
    standard unicycle has only one wheel, is driven by crank arms directly
    attached to the axle, and is propelled only by human force. Riders may
    use any number of unicycles, as long as all fit within the applicable
    restrictions for events in which they are entered.

    2.3.1 WHEEL SIZE: This is the maximum allowable tire diameter. Smaller
    sizes may be used. Some manufactured tires are marked with sizes larger
    than they actually are, but may be within the allowable size limit and
    vice versa.

    For 24" wheels, the outside diameter of the tire may not be larger than
    24.333" (61.8 cm).

    For 20" wheels, the outside diameter of the tire may not be larger than
    20.333" (51.6 cm).

    For 16" wheels, the outside diameter of the tire may not be larger than
    16.333" (41.5 cm).

    If a tire is in question, or has no size marked by its manufacturer, its
    outside diameter must be accurately measured.

    2.3.2 CRANK ARM LENGTH: This is the minimum allowable length, measured
    from the center of the wheel axle to the center of the pedal axle.
    Longer sizes may be used.

    - For 24” wheels, crank arms may be no shorter than 5” (125mm).

    - For 20” and 16” wheels, crank arms may be no shorter than 4½”
    (114mm).

    - For 16” wheels, crank arms may be no shorter than 100 mm (4”).

    2.4 CLOTHING AND SAFETY EQUIPMENT: Riders are required to wear the
    clothing and equipment below for participation in all events of track
    and field, plus events that may be named elsewhere. This applies to all
    outdoor competition events, including Slow races, with no exceptions.
    The referee has final say on whether a rider's safety equipment meets
    definitions. Starters will alert, or remove from the starting line,
    riders not properly equipped to compete, including riders with
    dangerously loose shoelaces. Riders completing events with insufficient
    equipment on will be disqualified. Though not mandatory in all events,
    helmets, elbow pads, shirts and other safety equipment are recommended.

    2.4.1 BASIC SET: This applies to all track events, plus any other
    track or field event not requiring the full set below. The basic set
    consists of shoes, kneepads, and wristguards or gloves meeting the
    definitions in section 1.28.

    2.4.2 FULL SET: This applies to all MUni, Trials, downhill racing
    (gliding), any event that goes backward at speed, plus events that may
    be named elsewhere. The full set consists of the basic set, with the
    additional requirement of a helmet. See definitions in section 1.28.

    From Section 1.28:

    FOOTWEAR FOR RACING: Shoes with full uppers are required. This means
    the shoe must cover the entire top of the foot. Sandals or thongs are
    not acceptable. Shoelaces must not dangle where they can catch in crank
    arms.

    GLOVES: (For racing) Any glove with thick material covering the palms
    (Leather is acceptable, thin nylon is not). Gloves may be fingerless,
    such as bicycling gloves, provided the palm of the hand is completely
    covered. Wrist guards, such as those used with in-line skates, are an
    acceptable alternative to gloves.

    HELMET: Helmets are recommended for all races, and are mandatory for
    some. Helmets must be of bicycle quality (or stronger), meeting ANSI,
    SNELL or ASTM standards for safety. No leather “hair nets” or helmets
    designed for low speed sports (football, hockey, etc.) are allowed.

    KNEEPADS: (For racing) Any commercially made, thick version is
    acceptable, such as those used for basketball and volleyball, or any
    with hard plastic caps. Kneepads must cover the entire knee and stay on
    during racing. Long pants, ace bandages, patches on knees and band-aids
    are not acceptable.

    - Unicycles need to have non-metal pedals and non-marking tires if you
    wish to use them on the track or in any of the indoor venues.

    - We hope to have many different workshops / clinics. Please be sure to
    indicate your ideas on the spaces provided on the registration form.

    Tom Daniels
    President, Unicycling Society of America, Inc.

    --
    tadaniels - USA President
    ------------------------------------------------------------------------
    tadaniels's Profile: http://www.unicyclist.com/profile/352
    View this thread: http://www.unicyclist.com/thread/32622

  3. Thanks, Tom. That helped a lot!🙂

    --
    elmer - uniimpaired

    "At 40 life begins...to show."
    ------------------------------------------------------------------------
    elmer's Profile: http://www.unicyclist.com/profile/5193
    View this thread: http://www.unicyclist.com/thread/32622

  4. tadaniels said:

    - For 24” wheels, crank arms may be no shorter than 5” (125mm).

    - For 20” and 16” wheels, crank arms may be no shorter than 4½”
    (114mm).

    - For 16” wheels, crank arms may be no shorter than 100 mm (4”).

    May I suggest that you use the exact conversion factor (1" = 25.4 mm)
    in your official rules. Am I nitpicking? The difference is more than
    1.5% and that may be significant in the end result.

    Klaas Bil - Newsgroup Addict
    --
    be sure to remove the saddle and simply sit on the seat post. this is far more comfortable - tennisgh22 on the comfort of Savage unis

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.