Cycling Equipment · Public discussion

Tufo sealant question

Started by Barryg · · Last activity · 5 posts · 792 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
13 October 2003
Last activity
14 October 2003
Original author
Barryg
Posts
5
Discussion status
Public discussion
Total views
792
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. I inherited a few slightly used Tufo tubulars that have been treated with the Tufo sealant. I'd
    appreciate comments from experienced Tufo users on whether it is common for the Tufo sealant to gum
    up the tire valve so that:

    1. It becomes very difficult to turn the valve nut

    and/or

    2. The valve won't seat properly and leaks air when closed, requiring valve replacement?

    Thanks for any help, Barry

  2. "BarryG" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    I inherited a few slightly used Tufo tubulars that have been treated with the Tufo sealant. I'd
    appreciate comments from experienced Tufo users on whether it is common for the Tufo sealant to
    gum up the tire valve so


    that:

    Quoted message said:


    1. It becomes very difficult to turn the valve nut

    and/or

    2. The valve won't seat properly and leaks air when closed, requiring


    valve

    Quoted message said:

    replacement?

    Thanks for any help, Barry


    If you don't do it right, yeah, those things happen...

    Mike

  3. BarryG said:

    I inherited a few slightly used Tufo tubulars that have been treated with the Tufo sealant. I'd
    appreciate comments from experienced Tufo users on whether it is common for the Tufo sealant to
    gum up the tire valve so that:

    1. It becomes very difficult to turn the valve nut

    and/or

    2. The valve won't seat properly and leaks air when closed, requiring valve replacement?

    Yes, both. Fortunately the valve is replaceable, ubiquitous and cheap.

    --
    Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971

  4. "BarryG" <[email hidden]> wrote in message news:<[email hidden]>...

    Quoted message said:

    I inherited a few slightly used Tufo tubulars that have been treated with the Tufo sealant. I'd
    appreciate comments from experienced Tufo users on whether it is common for the Tufo sealant to
    gum up the tire valve so that:

    1. It becomes very difficult to turn the valve nut

    and/or

    2. The valve won't seat properly and leaks air when closed, requiring valve replacement?

    Thanks for any help, Barry

    Dear Barry,

    I have no experience with Tufo, but it may resemble the green Slime anti-flat sealant. If so, the
    stuff can gum up Presta valves on clincher tubes and cause seating problems.

    Some defenses are using an air compressor to inflate tires (it tends to blast the valve clean) and
    working on the valve with it at either 4 or 8 o'clock (the slimy stuff tends to drip down out of the
    valve stem). Often, pressing down on a Presta valve will spray a bit of green slime and clear
    things, but it's nice to have an air compressor handy to clear, re-inflate, clear, and re-inflate if
    things are badly gummed up.

    Good luck,

    Carl Fogel

  5. Thanks very much for all the helpful comments. I'll order up some valve cores and valve tool and not
    work on it in the 6 o'clock position.

    Thanks, Barry

    "BarryG" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    I inherited a few slightly used Tufo tubulars that have been treated with the Tufo sealant. I'd
    appreciate comments from experienced Tufo users on whether it is common for the Tufo sealant to
    gum up the tire valve so


    that:

    Quoted message said:


    1. It becomes very difficult to turn the valve nut

    and/or

    2. The valve won't seat properly and leaks air when closed, requiring


    valve

    Quoted message said:

    replacement?

    Thanks for any help, Barry

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.