Ok, so a spoke just fell out of my bc wheel then i took it to the LBS and the guy fixed it and tightened all the spokes. So now i am trying to put the tire and tube back on and i know this sounds stupid but i cant pump it up because the valve is too far down. The rim on my wheel is in the shape of a "V" so i guess the valve isnt long enough but it was fine when i got it. I keep trying to pull it back up but it goes right back down when i let go, i have managed to get the pump on there a few times but it keeps blowing off because the valve keeps sinking in the rim. Its really annoying, HELP!😠
-- litldude2 - Spencer
Gallery.unicyclist.com/spencer ________________ LitlDude2: you suck Byrnetown: yea ________________ beware of the evan! ------------------------------------------------------------------------ litldude2's Profile: http://www.unicyclist.com/profile/6134 View this thread: http://www.unicyclist.com/thread/42326
just put the valve cap on the threads after you put it through the rim.
then mount the tyre.
then push your thumb down on the tyre above where the valve is.
take the cap off and have the pump ready and put that on.
pump as much as you can till your thumb cant hold it down anymore.
it sould be fine now, finish inflating the tyre.
-- jagur - Random Unicyclist
smoke me a kipper, i'll be back for breakfast. --------------------------------------------------- -forget_your_life- -------------------------------------- -------*muni militia *------- *one wheeled death squad* ------------------------------------------------------------------------ jagur's Profile: http://www.unicyclist.com/profile/502 View this thread: http://www.unicyclist.com/thread/42326
