trike rear wheel

Steve W said:

Any recommendations for the best rim on the rear of my tadpole trike. 559
(26"😉 size and using 1.35" to 1.5" tyres.
I assume there are other things to take into consideration because of the
side loading that will be experienced.

On a well-built wheel, most of the strength comes from the tension on
the spokes. A good, hand-built and -tensioned wheel will have far more
tension than a similar wheel built by a machine.

True, a wider rim will be better able to resist the side forces a trike
puts on a wheel, but most modern rims are more than strong enough,
particularly when built properly. I'd recommend a Salsa Semi:
http://harriscyclery.net/site/page.cfm?PageID=49&SKU=RM8610 for general
use or a Salsa Gordo if you're really worried about side forces:
http://harriscyclery.net/site/page.cfm?PageID=49&SKU=RM8619 . Bot are
available in a variety of drillings, up to 48-hole, if you're after the
ultimate wheel. 36 spokes should be adequate- we had no problems with
36-spoke Araya 7X's years ago:
http://www.pacifier.com/~jwills/Gallery/Aerorivr.jpg

Jeff

"Jeff Wills" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Steve W said:

Any recommendations for the best rim on the rear of my tadpole trike.
559
(26"😉 size and using 1.35" to 1.5" tyres.
I assume there are other things to take into consideration because of the
side loading that will be experienced.

On a well-built wheel, most of the strength comes from the tension on
the spokes. A good, hand-built and -tensioned wheel will have far more
tension than a similar wheel built by a machine.

True, a wider rim will be better able to resist the side forces a trike
puts on a wheel, but most modern rims are more than strong enough,
particularly when built properly. I'd recommend a Salsa Semi:
http://harriscyclery.net/site/page.cfm?PageID=49&SKU=RM8610 for general
use or a Salsa Gordo if you're really worried about side forces:
http://harriscyclery.net/site/page.cfm?PageID=49&SKU=RM8619 . Bot are
available in a variety of drillings, up to 48-hole, if you're after the
ultimate wheel. 36 spokes should be adequate- we had no problems with
36-spoke Araya 7X's years ago:
http://www.pacifier.com/~jwills/Gallery/Aerorivr.jpg

Jeff

The strength of the flanges on the hub might also be of some concern with a
tightly laced and highly loaded wheel, so don't go cheap and cheesy here.
See what gear the commercial trike builders use on their machines.

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---