Road Cycling · Public discussion

Trainer chewing up tires!!

Started by chris c · · Last activity · 4 posts · 310 views

Thread details

What we know about this thread

Original section
Road Cycling
Published
4 February 2006
Last activity
5 February 2006
Original author
chris c
Posts
4
Discussion status
Public discussion
Total views
310
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. I have a brand new kurt kinetic fluid trainer . I know it's a good trainer.
    I had an old michelin tire on it. It was flattening the center (making the
    tire not round in the middle). I set the tension like the manual says to. I
    made the tire touch and then gave it two additional turns. That is supposed
    to be ideal according to the manual. So, I tried a differnet tire
    (specialized armadillo) and only made it so the tire just touched . It still
    was taking off rubber in a couple spots. I assume this means the rim is not
    true. I just had it trued. It is not perfect, but I think it is not bad
    either. It is defenitely rideable. So i tightened the tension a little more
    cause I gave up and it ws too easy to ride(I would have to put it in the
    hardest gears). Now I noticed the wear is more consistent on the tire (the
    rubber wearing). Is this just a out of true wheel? Thanks a lot

  2. On Sat, 04 Feb 2006 17:01:27 GMT, "chris c" <[email hidden]>

    Quoted message said:

    I have a brand new kurt kinetic fluid trainer . I know it's a good trainer.
    I had an old michelin tire on it. It was flattening the center (making the
    tire not round in the middle). I set the tension like the manual says to. I
    made the tire touch and then gave it two additional turns. That is supposed
    to be ideal according to the manual. So, I tried a differnet tire
    (specialized armadillo) and only made it so the tire just touched . It still
    was taking off rubber in a couple spots. I assume this means the rim is not
    true. I just had it trued. It is not perfect, but I think it is not bad
    either. It is defenitely rideable. So i tightened the tension a little more
    cause I gave up and it ws too easy to ride(I would have to put it in the
    hardest gears). Now I noticed the wear is more consistent on the tire (the
    rubber wearing). Is this just a out of true wheel? Thanks a lot

    Trainers chew up tires. Maybe they don't tell you that in the manual. No tire is
    perfectly true and if you have low pressure on it the high spots will naturally
    wear first.

    Ron

  3. Continental is now selling a trainer-specific rear tire. Nashbar stocks it.

  4. Gooserider said:

    Continental is now selling a trainer-specific rear tire. Nashbar stocks it.

    http://www.nashbar.com/profile.cfm?category=&subcategory=&brand=&sku=16574&storetype=&estoreid=&pagename=

    ---
    Bob Anderson*Bitwisebob
    Eugene Oregon

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.