Where the boss screws into the braze-on. I now know they are *not* the
same size as the Hope hose guides 🙁
They are 10mm, but does anyone know the TPI? I was thinking to make up
my own.
I'll bet its some half-arsed mix of imperial and metric >:|
Cycling Equipment · Public discussion
Surly Karate Monkey Boss Threads
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 6 March 2006
- Last activity
- 7 March 2006
- Original author
- Tosspot
- Posts
- 5
- Discussion status
- Public discussion
- Total views
- 522
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Tosspot said:
Where the boss screws into the braze-on. I now know they are *not*
the same size as the Hope hose guides 🙁They are 10mm, but does anyone know the TPI? I was thinking to make
up my own.I'll bet its some half-arsed mix of imperial and metric >:|
Most likely 10x1mm.
--
Phil, Squid-in-Training -
Tosspot said:
Where the boss screws into the braze-on. I now know they are *not* the
same size as the Hope hose guides 🙁They are 10mm, but does anyone know the TPI? I was thinking to make up
my own.I'll bet its some half-arsed mix of imperial and metric >:|
Just checked my Instigator and it's 10x1. All Surly frames probably use
the same bosses. If you still have the boss, and it's about that size,
you could just try threading it into a derailer hanger to confirm. Or
thread a derailer into the boss mount. Or, yknow, measure the pitch
with a ruler. -
Nate Knutson said:
Tosspot said:
Where the boss screws into the braze-on. I now know they are *not* the
same size as the Hope hose guides 🙁They are 10mm, but does anyone know the TPI? I was thinking to make up
my own.I'll bet its some half-arsed mix of imperial and metric >:|
Just checked my Instigator and it's 10x1. All Surly frames probably use
the same bosses. If you still have the boss, and it's about that size,
you could just try threading it into a derailer hanger to confirm. Or
thread a derailer into the boss mount. Or, yknow, measure the pitch
with a ruler.Ta muchly for both responses. I shall be heading down the local
hardware shop and thence to a nice man with a lathe that understands
such matters. -
Phil said:
Tosspot said:
Where the boss screws into the braze-on. I now know they are *not*
the same size as the Hope hose guides 🙁They are 10mm, but does anyone know the TPI? I was thinking to make
up my own.I'll bet its some half-arsed mix of imperial and metric >:|
Most likely 10x1mm.
--
Phil, Squid-in-TrainingY'know, I think Phil's right:
http://harriscyclery.net/page.cfm?PageID=49&action=details&sku=FS1169Jeff
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.