SuperT and Hayes 8" brake

"Giovanni®" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

i have this setup on my bullit, marzocchi superT pro and hayes hydraulic

8"

Quoted message said:

disc brakes. i'm facing big trouble as i'm not able to fix the caliper on the fork's leg. i put
the wheel on the fork, the bike is upsidedown, than put the caliper on the disk and slightly
tighten the bolts but there is

some

Quoted message said:

space between the forks leg and caliper's body, what do i have to do, do i have to use washers?
there is no mechanic where i live and it is difficult to leave to fix this. can anyone help me?

thanks

Yep just shim it out with spacers, a little bit of experimentation may be required.

Steve.

Quoted message said:

Quoted message said:

Yep just shim it out with spacers, a little bit of experimentation may be required.

Steve.

I just discovered the cause of the problem, the adapter they gave me with the brakes aren't the
right one, they should have been 4,7mm thicker. I have to wait till next Tuesday to order a new one,
meanwhile i'll try with spacers.

thanks

"Giovanni" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Quoted message said:

Quoted message said:

Yep just shim it out with spacers, a little bit of experimentation may

be

Quoted message said:

Quoted message said:

required.

Steve.

I just discovered the cause of the problem, the adapter they gave me with the brakes aren't the
right one, they should have been 4,7mm thicker. I

have

Quoted message said:

to wait till next Tuesday to order a new one, meanwhile i'll try with spacers.

thanks

Yeah I was gonna say. Mine just bolted right on, no problems. You're gonna really like that bike, I
have the same setup.

Mike

On 5-12-2003 22:19, in article [email hidden], "Michael Dart" <[email hidden]>
ha scritto:

Quoted message said:

"Giovanni" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Quoted message said:

>
Yep just shim it out with spacers, a little bit of experimentation may

be

Quoted message said:

Quoted message said:

required.

Steve.

I just discovered the cause of the problem, the adapter they gave me with the brakes aren't the
right one, they should have been 4,7mm thicker. I

have

Quoted message said:

to wait till next Tuesday to order a new one, meanwhile i'll try with spacers.

thanks

Yeah I was gonna say. Mine just bolted right on, no problems. You're gonna really like that bike,
I have the same setup.

Mike

Now i'm going little crazy about shifing setup, rear shifter doesn't wants to go on larger sprocket
and seems that when going down the smaller, after the last is reached, the shifter has still one
more shift to do... Now i go disassembly the cable again, repeat everything from the beginning and
then go to front der (the chain touches a little when on bigger crown and the back of the bullit
doesn't allows to work on the setting screws very easily...)

thanks