I've been tinkering with this idea of using the new SRAM cassette with some missing tooth with my record wheelset. The reason is due to having done the successful mating with my previous 9 speed Ergos with SRAM's beautiful PG70 cogs (12-23).
Any comments or recommendations about the intended setup is most welcomed.
I've been tinkering with this idea of using the new SRAM cassette with some missing tooth with my record wheelset. The reason is due to having done the successful mating with my previous 9 speed Ergos with SRAM's beautiful PG70 cogs (12-23).
Any comments or recommendations about the intended setup is most welcomed.
Pat Singapore
SRAM 10s cassette spacing is identical to Shimano 10s. They will not install on Record hubs. You can use the SRAM cassette in the Campy 10s drivetrain with the same types of modifications that would be used for using a Shimano 10s cassette such as with a Shiftmate. Direct mating of S10 with C10 shifters is not as good as with 9s.
SRAM 10s cassette spacing is identical to Shimano 10s. They will not install on Record hubs. You can use the SRAM cassette in the Campy 10s drivetrain with the same types of modifications that would be used for using a Shimano 10s cassette such as with a Shiftmate. Direct mating of S10 with C10 shifters is not as good as with 9s.
Therefore, I suppose a American Classic Conversion cassette will get a better result. I got a few Shimano splined wheelse to use with my Record...