Cycling Equipment · Public discussion

Spinergy SR-3's

Started by Bill Graham · · Last activity · 2 posts · 802 views

← Back to Cycling Equipment

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
16 July 2003
Last activity
16 July 2003
Original author
Bill Graham
Posts
2
Discussion status
Public discussion
Total views
802
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–2 of 2
Posts remain in their original chronological order.

Text size
  1. Original post
    Bill Graham
    Archived post
    #1

    I'd like to open a rear wheel of these to inspect the pawls and re-lube/re-grease them. I don't know
    yet how strong the pawl springs are and if they like oil or light grease.

    Does anyone know who makes these hubs for Spinergy. They look kind of like older HED hubs, which
    were Swiss made as well I think. I need to find some instruction for a little piece of mine.

    Thank you very much,

    Bill Graham

    Report
  2. Qui Si Parla Ca
    Archived post
    #2

    Bill-<< I'd like to open a rear wheel of these to inspect the pawls and re-lube/re-grease them. I
    don't know yet how strong the pawl springs are and if they like oil or light grease. >><BR><BR>

    Oil onto pawls, particularly two pawl systems...

    Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
    (303)440-3535 vecchios.comvecchios.com "Ruote convenzionali costruite eccezionalmente bene"

    Report

Keep exploring

Browse the sectionCycling Equipment Return to CyclingForumsStart at the home page Search discussionsFind another thread

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.