SPDs creaking

Alex Graham said:

My left M515 spud keeps creaking v annoyingly

Try the solid wax sold for waxing drawer runners and things.

--
Guy
===
I wonder if you wouldn't mind piecing out our imperfections with your thoughts; and while you're
about it perhaps you could think when we talk of bicycles, that you see them printing their proud
wheels i' the receiving earth; thanks awfully.

highwaycode.gov.uk09.shtmlOpen ↗ highwaycode.gov.uk09.shtmlOpen ↗

Alex Graham <[email hidden]> wrote in message
news:<[email hidden]>...

Quoted message said:

My left M515 spud keeps creaking v annoyingly - smearing grease on the surface that makes contact
with the cleat solves it for a day or 2, but it soon returns. Does anyone have this problem, and a
solution to it other than regular greasing. Is tweaking the position of the cleat on the shoe
likely to have any effect? Or increasing spring tension?

It might not be from the pedal, it may be that the bolts in the shoe need tightened, I had that
problem a while back. Then again, I'm the dosey git who hadn't thought about putting sealant in the
rest of the shoe hole to make it waterproof until someone here suggested it, so you may be best not
listening to me :-/

Have fun!

Graeme

"Alex Graham" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

My left M515 spud keeps creaking v annoyingly - smearing grease on the surface that makes contact
with the cleat solves it for a day or 2, but it soon returns. Does anyone have this problem, and a
solution to it other than regular greasing. Is tweaking the position of the cleat on the shoe
likely to have any effect? Or increasing spring tension?

Cheers,

-Alex

Check your knee. :-)

Smudger said:

"Alex Graham" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

My left M515 spud keeps creaking v annoyingly - smearing grease on the surface that makes contact
with the cleat solves it for a day or 2, but it soon returns. Does anyone have this problem, and a
solution to it other than regular greasing. Is tweaking the position of the cleat on the shoe
likely to have any effect? Or increasing spring tension?

Cheers,

-Alex

Check your knee. :-)

hehe 🙂

Thanks for advice everyone - I shifted the cleat forward a bit (cos that foots bigger and it wasnt
quite in the right place anyway), and I mentioned it in the LBS yesterday and they thought the pedal
wasnt screwed into the crank tightly enough. So its had the giant spanner treatment and not creaked
since. Not massive time for it _to_ creak though.

It will probably start again now I've said this :P

-Alex