CyclingForums
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
handsomeway said:Does any one know if Powerway PHB-R13/PFH-R13 is compatible with Shimano Dura-ace 11 Speed System? What about Novatec A291SB/F482SB? Thanks for your time.
My inclination is to say no since neither company mentions compatibility with Shimano 11spd cassettes. The trend with hub manufacturers has been to announce a hubs compatibility with Shimano 11spd.
The 11-speed cassette requires a wider freehub body than the 10-speed cassette.
road.cc58457 first ride shimano dura ace 11 speedOpen ↗
"That extra width means that you can’t use a Shimano 11-speed cassette on a 10-speed hub – the hub needs to be 11-speed specific. You will, though, be able to use a 10-speed cassette on an 11-speed hub as long as you use an extra spacer to take up the slack."
The freehub will have to be specific to the new 11-speed width standard (although you can shim and use the older 10-speed cassette stack on the new 11-speed freehub body. I would check with the seller/manufacturer to see if they are using the newer width hub.
IIRC, I 'think' there was a hub manufacturer going with a 132 MM over-locknut dimension as opposed to re-spacing the hub flanges...could be faulty memory bank too.
HTH
No one is compatible con New Shimano 11speed cassette, you need a new hub to can use new 11speed groupset.
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.