Is it possible to use the chain rings from a 7703 setup with the crank
arms from a 7700? They look at first blush to be a match, but I have
to guess without actually taking them both apart and trying. Do the
7700 cranks fit onto the 7703 BB?
Thanks
David
Cycling Equipment · Public discussion
Shimano 7700 to 7703 Cranks
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 29 September 2005
- Last activity
- 29 September 2005
- Original author
- David James
- Posts
- 2
- Discussion status
- Public discussion
- Total views
- 580
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Basic answer - NO! Sheldon Brown's excellent Dura Ace article explains
in part:"the Dura-Ace is specifically designed NOT to fit a standard 130 double
crank, because the "shelves" that support and center the middle ring
get in the way. The "triple" Dura-Ace crank has had these "shelves"
machined off flush, so it is the only crank that can accept this
chainring, even though it does still use the standard 130 mm bolt
circle."For more on Dura Ace, go here:
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.