Seat post problem

Bedford unis use a 22.2mm post, I believe.

They aren't really available at bike shops(In my experience) because
bikes all use larger posts.

Bedford can set you up with steel, aluminum, or a carbon fiber seat
post of this size. (I find the aluminum one he sent me to be great)

Hope this helps.

-madmatt

--
madmattunipro

Quoted message said:

<>Unicycle For Christ<><

www.bedfordunicycles.ca

http://www.norco.com
------------------------------------------------------------------------
madmattunipro's Profile: http://www.unicyclist.com/profile/10763
View this thread: http://www.unicyclist.com/thread/62785

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Yup looks like your frame's ID will be 22.2mm, as the GB4 post has a
22.2mm OD: http://www.gb4mfg.com/seatpost.html

If the plate has not broken then it is possible to repair it by cutting
off the plate and rewelding it onto a tube of 22.2mm OD. This tube
could either be a standard unicycle seatpost with its plate cut off, or
better yet is to get a BMX 'candlewick' seatpost in 22.2mm OD. These
are a length of 22.2mm diameter tube which some older style BMXs used
as their seatposts. Ask your local bike shop for one [the ones I've
bought cost me about USD8 or NZD10]. I've repaired several 22.2mm
seatposts in this manner.

--
TonyMelton

Even a stopped clock gives the right time twice a day.
------------------------------------------------------------------------
TonyMelton's Profile: http://www.unicyclist.com/profile/2118
View this thread: http://www.unicyclist.com/thread/62785

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com