seat post clamps

I've done it both ways, but usually the clamp will mar the paint if you don't match the slots up.
I'd recommend you forsake appearance and match the slots.

Cheers,

Scott..
--
Scott Anderson

"Charles Beristain" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Is it imperative that the gap in the seat post clamp match up directly with the slot cut in the
seat stay, or can it be rotated 180 degrees?

I'm using quick releases, and on one bike the slot in the seat tube in in front and the other is
in back, so the handles on the quick releases face in opposite directions.. one toward the back (
which I like) and one toward the front.

thanks

charlie

Member Help Community Leader

Charles Beristain said:

Is it imperative that the gap in the seat post clamp match up directly with the slot cut in the
seat stay, or can it be rotated 180 degrees?

It is not likely to clamp as well if the gaps don't align.

Quoted message said:

I'm using quick releases, and on one bike the slot in the seat tube in in front and the other is
in back, so the handles on the quick releases face in opposite directions.. one toward the back (
which I like) and one toward the front.

Why not just swing the handle around so it faces to the rear?

If this really bothers you that much, you could saw a kerf in the opposite side of the seat tube.

Sheldon "Not A Big Problem" Brown +--------------------------------------------------+
| If you find yourself standing to accelerate, |
| on level ground, it is a sign that your gear |
| is too high, or that your saddle is too low. |
| See: sheldonbrown.comstanding.htmlOpen ↗ |
+--------------------------------------------------+ Harris Cyclery, West Newton, Massachusetts
Phone 617-244-9772 FAX 617-244-1041 harriscyclery.comharriscyclery.comOpen ↗ Hard-to-find parts shipped Worldwide
captainbike.comcaptainbike.comOpen ↗ sheldonbrown.comsheldonbrown.comOpen ↗

Guess I knew the answer, but was hoping that someone would come along and say it would be OK ... I
tried it today and it didn't interfer with my riding.. I thought maybe it could catch on my tights
... but that really is not the case... so i will leave it just where it is. I do need the quick
release as I like to drop the seat when riding on the frozen stream beds.

charlie

Member Help Community Leader