I pulled the derailer cable out so that I could pick up a replacement at
the bike shop the next day. (The cable that was being used was
*original*, putting it at about 11 or so years old...) But not thinking
about how things could wiggle their way loose, I had to run a quick
errand and since I have a triple up front I didn't worry about being
limited to the small cog for 20 minutes.
BUT, what I foolishly failed to do was remove the nut/washer that clamp
the cable on. So I come home to find that I have a threaded post hanging
in the breeze. Had I removed it or tightened it down before taking off
The newer derailers do things differently and the LBS didn't have
anything for me...but I spied a worn out v-brake shoe in my parts box
and the nut on the back looks identical to what wiggled its way off!!
....Except it's too large.
Here's some pictures, perhaps somebody has a junked RX100 or other
Shimano derailer with this style of cable attachment that could spare
the nut and washer. My ugly solution is mild steel and I'll probably end
up replacing it with a locknut - but I'd like to have something that
uses hex in case I need to fix it in the field.
http://www.userealsugar.com/bike/hextop.jpg
http://www.userealsugar.com/bike/threadbottom.jpg
http://www.userealsugar.com/bike/dbottom.jpg
http://www.userealsugar.com/bike/dfront.jpg
(The images of the nut are from the incorrect, but visually similar
brake pad piece)
-Thanks