Recumbent bicycles · Public discussion

Routing Bar-Con Cables

Started by Devon · · Last activity · 4 posts · 841 views

Thread details

What we know about this thread

Original section
Recumbent bicycles
Published
6 February 2004
Last activity
7 February 2004
Original author
Devon
Posts
4
Discussion status
Public discussion
Total views
841
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. Can anyone point me to a photo or graphic which shows the routing of the shifter cable or housing
    around/through the brake lever on a USS setup??

  2. [email hidden] (DeVon) wrote in message news:<[email hidden]>...

    Quoted message said:

    Can anyone point me to a photo or graphic which shows the routing of the shifter cable or housing
    around/through the brake lever on a USS setup??

    No pictures, but...

    Bar-con shifters should route the housing alongside the body of the brake lever. No conventional
    brake levers that I know of allow the housing to be routed "through" the body of the lever.

    If you have a digital camera, send me a photo of your setup and I'll mark it up with where I think
    the cable should go.

    Jeff

  3. [email hidden] (Jeff Wills) wrote in message news:<[email hidden]>...

    Quoted message said:

    [email hidden] (DeVon) wrote in message news:<[email hidden]>...

    Quoted message said:

    Can anyone point me to a photo or graphic which shows the routing of the shifter cable or
    housing around/through the brake lever on a USS setup??

    No pictures, but...

    Bar-con shifters should route the housing alongside the body of the brake lever. No conventional
    brake levers that I know of allow the housing to be routed "through" the body of the lever.

    If you have a digital camera, send me a photo of your setup and I'll mark it up with where I think
    the cable should go.

    Jeff

    I drilled a groove for the bar con housing at the gap in the clamp portion of SRAM 7.0 levers
    (mounted on Bacchetta bars). The groove needs to be big enough to avoid crimping the housing when
    the clamp is tightened. I got the idea from John Schlitter (Bacchetta) who drilled a groove at the
    base of the Shimano lever housing above the lever. A similar groove should work for a USS setup

  4. [email hidden] (DeVon) wrote in message news:<[email hidden]>...

    Quoted message said:

    Can anyone point me to a photo or graphic which shows the routing of the shifter cable or housing
    around/through the brake lever on a USS setup??

    I have mine routed ON TOP of the brake lever, and crosses it right where the adjustment bolt spans
    the split in the lever. This way, it is least likely to be under my fingers.

    Chris Vision R85 Double Vision USS

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.