Rolf Vector Comp Hub Maintenance

tlarwa said:

My rear wheel seems to be a bit "noisy" (whirring sound) when it's in the
stand and I spin it. I'm thinking it needs a hub overhaul (it's never been
done). Can anyone help me with the procedure? I tried to google it, but
with no luck.

Thanks!
[email hidden]

If it's a Hugi, take off the axle ends. pull the freehub body off, tap
the axle to the left to get that bearing out. Replace if gunky, grease
if not. OIL the freehub mech, not grease. The 'whirring' sound may be
the rubber seals under the axle ends. If all this makes no sense..see a
bike shop that 'qui si parla Rolf"

tlarwa said:

My rear wheel seems to be a bit "noisy" (whirring sound) when it's in the
stand and I spin it. I'm thinking it needs a hub overhaul (it's never been
done). Can anyone help me with the procedure? I tried to google it, but
with no luck.

Thanks!
[email hidden]

Your Vector Comps use the DT Swiss "Onyx" rear hub. Manual with
pictures is at DT Swiss' web site:
http://www.dtswiss.com/data/files/MAN_EN_50215101788.pdf

The Onyx rear hub is slightly different to the well-known 240: the
cassette rotor body isn't quite as easy to remove, but is still quite
simple.