Cycling Equipment · Public discussion

Reynolds Compression Plug ??

Started by mamboitaliano · · Last activity · 5 posts · 2,024 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
30 June 2009
Last activity
26 August 2009
Original author
mamboitaliano
Posts
5
Discussion status
Public discussion
Total views
2,024
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. I have a Reynolds Ouzo 1” carbon fork on my Italian steel and I was wondering, do you “have to” use their compression plug and if so why?

    Thanks - Rino

  2. mamboitaliano said:

    I have a Reynolds Ouzo 1” carbon fork on my Italian steel and I was wondering, do you “have to” use their compression plug and if so why?

    Thanks - Rino

    No, you don't have to. There are other plugs that will work; however, if you have a steerer issue, I doubt you'll get any sympathy from Reynolds. FWIW, when I had a Reynolds fork, I replaced the Reynolds bung with an Extralite bung. It worked fine.

    On my Look 595, the fork uses a Look bung which seems to be identical to that used by Reynolds. Those type bungs contact a larger surface area on the steerer ID, so methinks such bungs are less likely to cause steerer failures above the top headset bearing. There have been a few such failures of fork steerers in the past (not Look or Reynolds, but others.).

  3. I have a Reynolds fork that has a carbon steer tube. I use the Reynolds compression that came with the fork.
    I also talked with the people at Reynolds and they insist a compression plug is used if you have a carbon steer tube.

    The "star" washer type cut grooves in the tube and weaken it.

    Call Reynolds and give you mpre details.

    Cood luck.

  4. I have had a couple Reynolds forks. Nice forks, but I tend to dislike their compression plugs. They are heavy, offer little support and strip easily. I have used an FSA carbon model with some luck, but currently use an aluminum sleeve epoxied in there. Much lighter, stiff and offers a little insurance against my overagressive wrenching. The epoxying process is a little frustrating, but after a few tries, I have a nice set up (on my Reynolds fork). If you do go with another bunge, be aware that they can be inside-diameter specific. Reynolds id's tend to be a bit larger than other forks I've used.

    FWIW, the best set up IMHO is the Cannondale SI system which involves a starnut in the steerer and a top cap with a long sleeve that offers support. It's light, strong and never slips.

  5. offers a little allowance adjoin my overaggressive wrenching. be acquainted that they can be inside-diameter specific.

    __________________
    Individual health insurance

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.