Replacing my front fork

Haakon Studebaker said:

I have an GT Avanlanche 2.0. My front fork was stolen back in January and I
want to start riding it again. I have the tools and the patience but I'm
unsure about the parts I need to buy.

Tools: Hacksaw and steerer cutting guide (unless you can cut really
straight) or big tubing cutter, and 5mm allen wrench. If you are
really insistent about doing the whole job yourself, you will also
want to buy or fabricate a setter for the starfangled nut. From
personal experience, unless you have installed a few of those, I'd say
you're better off having someone else do it. This is a job that looks
incredibly easy...and isn't, unless you have the right tool.

Parts, assuming that the bars, levers and stem remain present: Fork,
front wheel with tire, caliper, brake disc, bolts for disc and
caliper, starfangled nut (have the bike shop knock this into place
after you cut the tube; see note above), brake cable and housing,
skewer, headset (the bottom bearing and crown race are pretty much
guaranteed to have been stolen with the fork) and spacers as needed to
achieve the correct stem height.

Quoted message said:

I know I need a front fork, a disc brake caliper, a new front brake cable
but I'm unsure if I'll need anything else. Right now I have a baggie full
of three washer-like things, a small conical spring

Maybe from the wheel skewer?

Quoted message said:

and the cap which goes
in the middle of the handlebars.

How or where do I find out the parts that are needed?

See above.

Quoted message said:

Just that I want to
do this myself rather than pay someone else for the labor in addition to
shopping around to get the best price for the best parts.

Good luck in your search. Bargains can often be had, but sometimes
the search has to be carried on for quite a while before the good
stuff is located. In particular, don't settle for just any fork; this
is the one area where spending more than you feel is reasonable would
be better than buying a cheap substitute. In my opinion, the RST Gila
was no prize; I'd shop for a RockShox or a Marzocchi instead.

I'd also give strong consideration to carrying a second U-lock to use
just for locking the fork to the frame.
--
Typoes are a feature, not a bug.
Some gardening required to reply via email.
Words processed in a facility that contains nuts.

Werehatrack said:

Haakon Studebaker said:

I have an GT Avanlanche 2.0. My front fork was stolen back in January and I
want to start riding it again. I have the tools and the patience but I'm
unsure about the parts I need to buy.

Tools: Hacksaw and steerer cutting guide (unless you can cut really
straight) or big tubing cutter, and 5mm allen wrench.

Pffffttt, holy [censored]! I went and looked for a "steerer cutting guide"
and it's $75! Last time I cut a steer tube, I used a $10 miter box I
had picked up from the HW store for woodworking projects. I strapped
the fork to the miter box with some zip ties and had it cut in no time
at all. Is the steerer cutter really worth the $65 difference? [1]

Quoted message said:

If you are
really insistent about doing the whole job yourself, you will also
want to buy or fabricate a setter for the starfangled nut. From
personal experience, unless you have installed a few of those, I'd say
you're better off having someone else do it. This is a job that looks
incredibly easy...and isn't, unless you have the right tool.

Good thing I didn't know that when I did it. ;-) I whacked it in and
managed to do a perfectly adequate job with my improvised method. I did
pick up the *correct* tool for the next time I have to do it.

[1] Not being a smart-[censored], I'm truly curious.

--
Dane Buson - [email hidden]
"I had an IQ test. The results came back negative."

Dane Buson said:

Werehatrack said:

Haakon Studebaker said:

I have an GT Avanlanche 2.0. My front fork was stolen back in January and I
want to start riding it again. I have the tools and the patience but I'm
unsure about the parts I need to buy.

Tools: Hacksaw and steerer cutting guide (unless you can cut really
straight) or big tubing cutter, and 5mm allen wrench.

Pffffttt, holy [censored]! I went and looked for a "steerer cutting guide"
and it's $75! Last time I cut a steer tube, I used a $10 miter box I
had picked up from the HW store for woodworking projects. I strapped
the fork to the miter box with some zip ties and had it cut in no time
at all. Is the steerer cutter really worth the $65 difference? [1]

Quoted message said:

If you are
really insistent about doing the whole job yourself, you will also
want to buy or fabricate a setter for the starfangled nut. From
personal experience, unless you have installed a few of those, I'd say
you're better off having someone else do it. This is a job that looks
incredibly easy...and isn't, unless you have the right tool.

Good thing I didn't know that when I did it. ;-) I whacked it in and
managed to do a perfectly adequate job with my improvised method. I did
pick up the *correct* tool for the next time I have to do it.

[1] Not being a smart-[censored], I'm truly curious.

I don't see why a steerer tube even has to particularly square. I've set
a bunch of star nuts with a long bolt and hammer, didn't seem too tricky.

Peter Cole said:

Dane Buson said:

Werehatrack said:

If you are really insistent about doing the whole job yourself, you
will also want to buy or fabricate a setter for the starfangled nut.
From personal experience, unless you have installed a few of those,
I'd say you're better off having someone else do it. This is a job
that looks incredibly easy...and isn't, unless you have the right
tool.

Good thing I didn't know that when I did it. ;-) I whacked it in
and managed to do a perfectly adequate job with my improvised method.
I did pick up the *correct* tool for the next time I have to do it.

I don't see why a steerer tube even has to particularly square. I've
set a bunch of star nuts with a long bolt and hammer, didn't seem too
tricky.

That was my solution as well. Not really elegant, but I needed to ride
into work the next day, and my only bike looked like this:

http://members.arstechnica.com/x/zuvembi/surly_parted.jpg

--
Dane Buson - [email hidden]
XML is like violence -- if its not solving your problem, use more.