I'm looking for plans (or a pre-made one) for a platform which I can easily attach to and remove from my rear rack, which would be big enough to hold a large gym bag (approx 27" long, 12" wide) without it hanging way off the end and sides as it does on the factory rack.
I'm sure I could whip something up out of 1/4" plywood and four u-bolts, but was wondering is somebody knows of a better-looking, more durable solution.
Aluminum would be nice, but not necessary. I have wood working tools, but not much in the way of metal working tools except for a bench vise and, a hacksaw and a Dremel, so complex metal bending and welding are out (simple bending and soldering are ok).
Thanks for any suggestions! -- Remove the ns_ from if replying by e-mail (but keep posts in the newsgroups if possible).
I'm looking for plans (or a pre-made one) for a platform which I can easily attach to and remove from my rear rack, which would be big enough to hold a large gym bag (approx 27" long, 12" wide) without it hanging way off the end and sides as it does on the factory rack.
Sounds like you need a "Load Llama" bike-rack. My wife has one on her bike and loves it, but I think they may no longer be available. The manufacturer was Nett Designs, and I can't find them or a distributor online.
Originally posted by David Kerber I'm looking for plans (or a pre-made one) for a platform which I can easily attach to and remove from my rear rack, which would be big enough to hold a large gym bag (approx 27" long, 12" wide) without it hanging way off the end and sides as it does on the factory rack.
I had a similar problem with a cheap rear rack bag that I purchased. It had no internal structure to it, so it would sag/hang over the edges of the rack. I solved it by going to Wal-Mart and purchasing an inexpensive plactic storage box with removable lid. I used the box for storage in the basement, and I used the lid as a platform for the rack. It was very cheap and very weatherproof. In my case, I attached it by cutting some slots in it and using velcro straps to attach it to the rack. It is holding up well to the rigors of regular commuting.
In article <[email hidden]>, usenet- [email hidden] says...
Quoted message said:
Originally posted by David Kerber I'm looking for plans (or a pre-made one) for a platform which I can easily attach to and remove from my rear rack, which would be big enough to hold a large gym bag (approx 27" long, 12" wide) without it hanging way off the end and sides as it does on the factory rack.
I had a similar problem with a cheap rear rack bag that I purchased. It had no internal structure to it, so it would sag/hang over the edges of the rack. I solved it by going to Wal-Mart and purchasing an inexpensive plactic storage box with removable lid. I used the box for storage in the basement, and I used the lid as a platform for the rack. It was very cheap and very weatherproof. In my case, I attached it by cutting some slots in it and using velcro straps to attach it to the rack. It is holding up well to the rigors of regular commuting.
That sounds like a good, inexpensive solution. Thanks for the suggestion.
-- Remove the ns_ from if replying by e-mail (but keep posts in the newsgroups if possible).
