How much "play" should there be on a rear coaster brake? It seems when the pedal is pressed, there
is about 4 - 5 inches of movement before the brake takes effect.
This is a childrens 20" bike.
Thanks
A community for cyclists, gear, training and racing.
Road Cycling · Public discussion
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
How much "play" should there be on a rear coaster brake? It seems when the pedal is pressed, there
is about 4 - 5 inches of movement before the brake takes effect.
This is a childrens 20" bike.
Thanks
In article said:How much "play" should there be on a rear coaster brake? It seems when the pedal is pressed, there
is about 4 - 5 inches of movement before the brake takes effect.
That sounds sloppy to me, my coaster brake has less play than that and it's probably not been
serviced for 40 years. Most of the popular coaster brakes are not very hard to overhaul and a guts
kit can be found at a bike shop - call around and let them know which hub you have. Sometimes you
need to find an old "family" bike shop, Schwinn dealer type place or shop that specializes in BMX.
If the rim is also in poor shape then you may find replacement of the whole wheel is better - often
you can find a wheel (maybe on a bike) at a garage sale or Good Will store for almost nothing.
--Paul
"Paul Southworth" <[email hidden]> wrote in message
"]news:[email hidden]...
Quoted message said:That sounds sloppy to me, my coaster brake has less play
than that
Quoted message said:and it's probably not been serviced for 40 years. Most of
the
Quoted message said:popular coaster brakes are not very hard to overhaul and a
guts kit
Quoted message said:can be found at a bike shop - call around and let them
know which
Quoted message said:hub you have. Sometimes you need to find an old "family"
bike shop,
Quoted message said:Schwinn dealer type place or shop that specializes in BMX.
If the
Quoted message said:rim is also in poor shape then you may find replacement of
the whole
Quoted message said:wheel is better - often you can find a wheel (maybe on a
bike) at
Quoted message said:a garage sale or Good Will store for almost nothing.
Just pull it apart, clean and regrease it, adjust the bearings, and you'll be fine. Though they have
a few extra parts, they're no more complicated than any other hub.
Matt O.
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.