Mike said:Hi all,
A couple of months ago I bought a Brooks B66 for my Raleigh 3-speed.
Now that is is broken in a bit, it feels really great on my sit bones,
but the seat is just too far forward, and I have it pushed backed as
far is it will go. I am using an old-style straight seatpost with the
Brooks clamp for the 2-rail saddle.
Quoted message said:1) Is there a relatively inexpensive (say, < USD50) solution for
moving the saddle back by changing the seatpost or clamp?2) If I swap the B66 for a different Brooks model, perhaps a
single-rail model, will I be able to get it any further back?
Received no replies to this post, so I am following up myself. I
couldn't find anything useful currently available. Bill Laine of
wallbikes suggested I try ebay.
Bingo! The keyword to look for is "layback". Apparently, these
seatposts were popular on bmx style bikes. Most of them come in 7/8"
diameter, but there were a few 1" diameter which fit the Raleigh
frame. It's basically just a standard seatpost with a 30 degree bend
about 4 inches from the top.
It gives me the setback I need, plus it also looks very sleek (that
aerodynamic bend, you know).
Still haven't decided if I will keep the B66, but at least I am now
in the right position relative to the frame.
Mike