For my triton I'm using a slightly modified CF clamp, it cost me 30 AUD
on ebay. When I first got it, it sucked. It wouldn't clamp hard enough,
so I widened the gap and now its much better, it was also really easy to
do with just a bit of sand paper. This clamp isn't threaded actualy on
the clamp, there is a steel insert that the hex bolt threads into. The
insert and the hex bolt meet like a T the top part being the insert and
the long bottom part being the hex bolt.
I also use a BBB clamp. This one is wayyy better! I don't even clamp it
down to the point where I feel like I'm cranking it down all the way, I
just go for a bit and then its already mad tight. It is also very
light, thin, and probably cheap (I got a great deal from Danni).
If you can get one with a warranty, that would definitely be cool
though.
--
ntappin
'how to build a strong comfy saddle from junk.'
(http://tinyurl.com/hxcb3)
------------------------------------------------------------------------
ntappin's Profile: http://www.unicyclist.com/profile/10800
View this thread: http://www.unicyclist.com/thread/66110
Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com