Cycling Equipment · Public discussion

Re: How about a custom saddle maker?

Started by (Pete Cresswell) · · Last activity · 4 posts · 325 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
14 March 2005
Last activity
15 March 2005
Original author
(Pete Cresswell)
Posts
4
Discussion status
Public discussion
Total views
325
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. Per Bestest Handsander:

    Quoted message said:

    From that I conclude
    that Gibo's butt in no way resembles

    One no-cost move is to get a little quantification on your butt, specifically
    ischial tuberosity width.

    You're probably in the same range as 98% of the rest of the world - but it would
    seem like a good idea to know for sure because if you're a statistical outlier
    that will narrow your choice of saddles a great deal.

    Contrary to what some may think, measuring sit bone width does not need to
    involve a trusted friend, a set of calipers, and a quart of tequila.

    Instead, find some material that will dent and hold the dent and then sit on it
    long enough for your sit bones to make their mark.

    Inch-thick styrofoam works, as do some cardboards, or even a sheet of paper on
    the right-textured rug.

    Once you have a center-to-center measurement on the dents, you can start looking
    at the usable width of various saddles.

    Certainly width isn't the whole story - or even most of the story.... but it's
    definately a "go-no-go" thing.... if the saddle is too narrow there's no hope.
    Same if it's so wide that your thighs chafe...
    --
    PeteCresswell

  2. : Certainly width isn't the whole story - or even most of the story.... but
    it's
    : definately a "go-no-go" thing.... if the saddle is too narrow there's no
    hope.
    : Same if it's so wide that your thighs chafe...
    : --
    : PeteCresswell

    the easiest way is to take a piece of typing paper out to the curb and sit
    down. when you get up, you'll see the dents in the paper and can measure the
    width between them.

    Pat in TX

  3. On Mon, 14 Mar 2005 17:51:38 -0500, "(Pete Cresswell)" <[email hidden]>

    may have said:

    Contrary to what some may think, measuring sit bone width does not need to
    involve a trusted friend, a set of calipers, and a quart of tequila.

    Tequila? Never. Schnapps or cognac; nothing else will serve.

    Quoted message said:

    Instead, find some material that will dent and hold the dent and then sit on it
    long enough for your sit bones to make their mark.

    The hood of a BMW will often serve quite well, but this is best done
    with careful attention to appropriate selection of time and place.

    Quoted message said:

    Inch-thick styrofoam works, as do some cardboards, or even a sheet of paper on
    the right-textured rug.

    Beware of doing this too close to the edge of the carpet, however.
    (For greatest authenticity, use rice paper; if you leave no marks,
    then you are ready to perch upon any saddle that fortune presents.)

    Quoted message said:

    Once you have a center-to-center measurement on the dents, you can start looking
    at the usable width of various saddles.

    Certainly width isn't the whole story - or even most of the story.... but it's
    definately a "go-no-go" thing.... if the saddle is too narrow there's no hope.
    Same if it's so wide that your thighs chafe...

    This, however, is a measurement factor at the *other* end, unless you
    mount your saddle in a manner that is illegal in Alabama.

    --
    My email address is antispammed; pull WEEDS if replying via e-mail.
    Typoes are not a bug, they're a feature.
    Words processed in a facility that contains nuts.

  4. another thought is the relation of the tuberosities to the meat on your
    upper thigh and how this mass relates to the tubers and the seat-in not
    contatcing the seat with the upper thigh skin or the south end of your
    gluteals beyond the tubers butt before the thigh.
    this is a real problem in too short top tubes for tall riders with
    short normal frames-the power comes in with the thigh contacting the
    saddle and discomfort on a long climb

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.