Andrew Karre said:Sorry, this is all garbled. This is the problem: Once I've shifted into
the smallest cog (using the thumb lever), I can't downshift (shift back
up the cassette into larger cogs with the inner lever). The ratchet
won't catch, and the lever swings all the way in with no effect. If I
push up and in on the lever, I can force the ratchet to engage and it
will shift from the 10th down to 9th, and from then on with no problem
at all. Any thoughts?
Question - have you reinstalled the levers yet? I remember noticing
behavior something like this on a set of "in-the-box" Ergo levers; all
was well once a cable was installed providing some tension, and they've
worked fine for many miles since.
If you've got this problem with a cable already providing something to
pull against, you can disregard this advice.
Mark Janeba