Re: brake system??

i wish Magura would come out with a cable version of their design...one
that looks the same but is mechanically operated.

--
jagur - Random Unicyclist

Smoke me a kipper, I'll be back for breakfast.
---------------------------------------------------
-forget_your_life-
--------------------------------------
-------*muni militia *-------
*one wheeled death squad*
------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/38536

ok thanks fer da info🙂

--
musketman
------------------------------------------------------------------------
musketman's Profile: http://www.unicyclist.com/profile/9214
View this thread: http://www.unicyclist.com/thread/38536

its possible to use a vee-brake. i did it to my semcycle xlw. took the
brake tabs off my bike i killed after some measuring then placed the
tabs onm the uni frame after gringing the finish a lil so i could weld
them on. measured them so they were close to correct and tacked on the
tabs. added the brake to check for wheel-pad clearance and height and to
see if it cleared a gazz 2.6. once it did(minor tweaking) i fully
welded them on and hacked a lever to make a hook at the end of the
original lever for something to grab. next use a kids bike seat clamp
that fits your seat post and weld a tube or even bike handlebar(i used
this cut to the appropriate length) and weld to the seat post clamp.
now you have a brake and a mounting location for your lever too that is
removable. oh yeah since i ride bikes, these were all scrap parts i
had and costed me nothing. no $$ except for time😄

--
uniracer - redneck eh?
------------------------------------------------------------------------
uniracer's Profile: http://www.unicyclist.com/profile/403
View this thread: http://www.unicyclist.com/thread/38536