Recumbent bicycles · Public discussion

RANS seat mods

Started by carpe_slug · · Last activity · 4 posts · 787 views

Thread details

What we know about this thread

Original section
Recumbent bicycles
Published
13 August 2004
Last activity
24 August 2004
Original author
carpe_slug
Posts
4
Discussion status
Public discussion
Total views
787
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. I know RANS was doing beta testing on a seat mod to make it more
    comfortable. Does anyone know if the mods really work? We have a
    Screamer and my stoker is off the bike due to doctors orders. Should
    we get the mods or look for a new seat?

  2. [email hidden] (carpe_slug) wrote in message news:<[email hidden]>...

    Quoted message said:

    I know RANS was doing beta testing on a seat mod to make it more
    comfortable. Does anyone know if the mods really work? We have a
    Screamer and my stoker is off the bike due to doctors orders. Should
    we get the mods or look for a new seat?

    i had them modify mine, but i really haven't put the miles on the bike
    in hilly areas since than to give a good report, it does seem to work
    on the flats, but i really experienced the problem on steep climbing.
    it wasn't a muscular comfort factor for the seat that the mods are
    for.
    the seat pan was digging into the tail bone area, you would know
    since it leaves a blister or a sore

  3. [email hidden] (mike) wrote in message news:<[email hidden]>...

    Quoted message said:

    [email hidden] (carpe_slug) wrote in message news:<[email hidden]>...

    Quoted message said:

    I know RANS was doing beta testing on a seat mod to make it more
    comfortable. Does anyone know if the mods really work? We have a
    Screamer and my stoker is off the bike due to doctors orders. Should
    we get the mods or look for a new seat?


    From the feedback i have heard the beta program did work but this is a
    program not promoted by RANS since the big blow-up. It requires your
    sending your seats in to them, their doing the change, and then
    shipping them back. I don't know who pays the costs. Alternatively,
    some other solutions which affected riders have come up with are:

    1. Filing down the rear seat pan lip (it is the lip which causes the
    problem, not the pad as RANS claims),
    2. Adding additional foam around the lip to soften (but not eliminate)
    the lip issue,
    3. Replacing the seat cushion with a denser foam and making sure that
    the foam totally encapsulates the rear lip,
    4. Bending the brace bars and forms to bring the seat back closer to
    the rear of the seat pan,
    5. Living with it.

    The seat problem is not endemic to all RANS seats which makes the
    problem frustrating for the consumer. You may find other seats built
    in the same year as your present seats which don't exhibit the problem
    thus negating the claim that it is the rider fit and not the seat
    which is the problem. Good luck on solving the problem. Of course,
    you could try to switch to a zephyr seat. Reports are they don't dig
    into your "rear" just your shoulder blades!

    Mike S.
    St. Louis, Mo

  4. Thanks for all the feedback. We went ahead and had the mod done to the
    stoker seat. It was $30 and RANS was nice enough to Fed-Ex the seat
    back to us. Unfortunatly, my stoker is still too sore to test out the
    fix properly. It may be a month or two before I'll know if the mod
    works!

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.