Cycling Equipment · Public discussion

Raleigh Twenty Stem Change

Started by Pooh · · Last activity · 2 posts · 1,014 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
16 December 2003
Last activity
16 December 2003
Original author
Pooh
Posts
2
Discussion status
Public discussion
Total views
1,014
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–2 of 2
Posts remain in their original chronological order.

Text size
  1. I was able to buy a used Raleigh Twenty over the weekend for $50 US in fair condition.

    In reading Sheldon's site the steerer tube on the red bike pictured has what looks to be a long
    steerer extension with a threadless stem bolted on. The top of the headset was converted to a ball
    and cone unit.

    Where does one find a steerer extension like the one pictured? Or is it a long neck threaded unit
    with the stem part ground off? Or maybe that's the steerer tube on the fork that you see? I don't
    want to replace the fork at this time though.

    Awaiting inspiration in Fremont.

  2. A shy bear said:

    I was able to buy a used Raleigh Twenty over the weekend for $50 US in fair condition.

    In reading Sheldon's site the steerer tube on the red bike pictured has what looks to be a long
    steerer extension with a threadless stem bolted on. The top of the headset was converted to a ball
    and cone unit.

    Where does one find a steerer extension like the one pictured? Or is it a long neck threaded unit
    with the stem part ground off? Or maybe that's the steerer tube on the fork that you see? I don't
    want to replace the fork at this time though.

    That particular fork is a Haro BMX fork that was discarded because the steer threads had
    been wrecked.

    I got another steerer, can't recall whether it was a new one or cut from an old fork. I cut about a
    2 1/2" section from an old steel handlebar stem, used it as a connector between the old and new
    stem, then brazed it in place.

    I no longer use this fork, 'cause I installed an SR suspension fork in its place. These have a long
    steel steerer, threadless. Because the steerer is threadless, it is quite long.

    The small wheels really benefit from the suspension, and the fork has studs that allowed me to
    install a V-brake, solving another persistent Raleigh Twenty flaw.

    I threaded the steerer and installed a conventional J.I.S. headset. This is a much better setup than
    the rigid fork.

    I sell these forks, threaded, for $139.95.

    Then again, if you're just looking for more height, a $19.95 stem extender will do the trick (though
    it won't work with the stock Twenty stem, 'cause it lacks an expander/wedge.)

    Sheldon "sheldonbrown.orgraleigh twenty.html" Brown +------------------------------------------------
    +
    | Nobody who has anything to do with bicycles | has _all_ of their marbles, and some of us | are
    | certifiable! | --Sheldon Brown |
    +------------------------------------------------+ Harris Cyclery, West Newton, Massachusetts Phone
    617-244-9772 FAX 617-244-1041 harriscyclery.comharriscyclery.com Hard-to-find parts shipped Worldwide
    captainbike.comcaptainbike.com sheldonbrown.comsheldonbrown.com

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.