Cycling Equipment · Public discussion

Pulling to the left on the rollers

Started by Clyde · · Last activity · 4 posts · 591 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
23 November 2003
Last activity
24 November 2003
Original author
Clyde
Posts
4
Discussion status
Public discussion
Total views
591
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. Since I started riding rollers this fall, I notice that I always seem to pull a little to the left,
    and I'm always correcting to the right. Never the opposite way around. I have checked that the rear
    wheel is centered. I reversed the rear tire, and no change. I have not crashed the bike, but I have
    fallen over at stops a few times due to forgetting to unclip. The fork looks ok.

    But I have major indexing in the headset. Could that be the cause of the uneven riding?

    Clyde

  2. Clyde said:

    Since I started riding rollers this fall, I notice that I always seem to pull a little to the left,
    and I'm always correcting to the right. Never the opposite way around. I have checked that the rear
    wheel is centered. I reversed the rear tire, and no change. I have not crashed the bike, but I have
    fallen over at stops a few times due to forgetting to unclip. The fork looks ok.

    But I have major indexing in the headset. Could that be the cause of the uneven riding?

    Definitely the headset thing. With less tracking on the totally smooth roller, the detent in the
    headset is enough to pull you off track.

  3. Clyde said:

    Since I started riding rollers this fall, I notice that I always seem to pull a little to the
    left, and I'm always correcting to the right. Never the opposite way around. I have checked that
    the rear wheel is centered. I reversed the rear tire, and no change. I have not crashed the bike,
    but I have fallen over at stops a few times due to forgetting to unclip. The fork looks ok.

    But I have major indexing in the headset. Could that be the cause of the uneven riding?

    Yes of course.

    Knock out the headset cups and re-press them. It is astronomically unlikely that you could get the
    dents to line up again.

    That should give you a little more life from it.

    And then next season ( or whenever it begins to be annoying) just buy a headset. They are cheap and
    not worth anguishing over. Proper lubrication and adjustment can help. Frequent rebuilds with fresh
    lube are useful as well. Nothing is a "cure' for death by mileage but a dearth of lube or a tight
    adjustment bring a quicker demise. Here's more on that:

    draco.acs.uci.edu8f.13.html

    --
    Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971

  4. Is the floor level? Try turing it 180 degrees and see if you pull to the other side.

    "Clyde" <[email hidden]> wrote in message "]news:[email hidden]...

    Quoted message said:

    Since I started riding rollers this fall, I notice that I always seem to pull a little to the
    left, and I'm always correcting to the right. Never the opposite way around. I have checked that
    the rear wheel is centered. I reversed the rear tire, and no change. I have not crashed the bike,
    but I have fallen over at stops a few times due to forgetting to unclip. The fork looks ok.

    But I have major indexing in the headset. Could that be the cause of the uneven riding?

    Clyde

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.