I've got a "sticky" presta valve. You have to really push and pull on it to get it to unstick and let some air out, and when you try and pump it up the guage goes up to 150psi and then sinks as the air works its way in.
Would I risk damaging the valve if I squirted a little WD40 into it, or would it be better just to replace the tube?
I've got a "sticky" presta valve. You have to really push and pull on it to get it to unstick and let some air out, and when you try and pump it up the guage goes up to 150psi and then sinks as the air works its way in.
Would I risk damaging the valve if I squirted a little WD40 into it, or would it be better just to replace the tube?
I've got a "sticky" presta valve. You have to really push and pull on it to get it to unstick and let some air out, and when you try and pump it up the guage goes up to 150psi and then sinks as the air works its way in.
Would I risk damaging the valve if I squirted a little WD40 into it, or would it be better just to replace the tube?
Before I put the pump on, I always give the vlave a little push to free it up.
WD40 would not dothe inner tube any good. A bit of soapy water might be better
I've got a "sticky" presta valve. You have to really push and pull on it to get it to unstick and let some air out, and when you try and pump it up the guage goes up to 150psi and then sinks as the air works its way in.
Would I risk damaging the valve if I squirted a little WD40 into it, or would it be better just to replace the tube?
Before I put the pump on, I always give the vlave a little push to free it up.
WD40 would not dothe inner tube any good. A bit of soapy water might be better
For the price of a new tube is it really worth the worry?
-- Mark ______________________________________ Nerves of Steel, Heart of Gold, Knob of Butter
I've got a "sticky" presta valve. You have to really push and pull on it to get it to unstick and let some air out, and when you try and pump it up the guage goes up to 150psi and then sinks as the air works its way in.
Would I risk damaging the valve if I squirted a little WD40 into it, or would it be better just to replace the tube?