Recumbent bicycles · Public discussion

Not bad for $10

Started by Denny Voorhees · · Last activity · 2 posts · 696 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Recumbent bicycles
Published
19 April 2003
Last activity
24 April 2003
Original author
Denny Voorhees
Posts
2
Discussion status
Public discussion
Total views
696
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–2 of 2
Posts remain in their original chronological order.

Text size
  1. Several years ago, Nashbar ran a deal on shoes and SPD pedals. Buy a pair of shoes and get a set of
    pedals for $10 more (I think that was the price). Well I bought a pair of cheap shoes and a pair of
    pedals. I seem to recall I had about $30 bucks in the whole deal. It was 1997, and it was time to
    shed the toe clips. The pedals first found their way on my Cannondale road bike and over the next
    two seasons I put about 3500 miles on them. I hung up the Cannondale late in 1998. When I got my
    Vrex in 2000 I needed some SPD's. A couple turns of the wrench and they were now part of the power
    train of the Vrex. 8500 miles later, they transferred over to the Giro. Today I noticed my right
    foot was not locking into the pedal on one side. After a nice ride this afternoon a close
    examination of the pedal shows one sides' locking tab is broken. As luck would have it I had ordered
    a pair this winter, so I have back ups. Counting the 850 miles on the Giro, the cheapy Nashbar SPD
    clones have given me nearly 13000 miles of service. Some times you takes your chances and it comes
    out good Spring is back today 70 degrees this afternoon and beautiful. Days like this remind me why
    I still live here. Denny in Sayre, Pa "Bent but not broken" www.recumbentstuff.com

  2. I almost fell for that same deal at Nasbar. Fortunately for me, they were out of the $10 pedals so I
    bit the bullet and bought a $50 pair of Wellgos. Those pedals are now on their second bike, and 5000
    miles later they still work great. Recently I saw some of those $10 pedals in a LBS... CHEAP! Just
    turning it in my hand, it felt like the bearings were all flat-spotted. Glad I didn't waste the $10.

    "Denny Voorhees" <[email hidden]> wrote in message
    news:<[email hidden]>...

    Quoted message said:

    Several years ago, Nashbar ran a deal on shoes and SPD pedals. Buy a pair of shoes and get a set
    of pedals for $10 more (I think that was the price). Well I bought a pair of cheap shoes and a
    pair of pedals. I seem to recall I had about $30 bucks in the whole deal. It was 1997, and it was
    time to shed the toe clips. The pedals first found their way on my Cannondale road bike and over
    the next two seasons I put about 3500 miles on them. I hung up the Cannondale late in 1998. When I
    got my Vrex in 2000 I needed some SPD's. A couple turns of the wrench and they were now part of
    the power train of the Vrex. 8500 miles later, they transferred over to the Giro. Today I noticed
    my right foot was not locking into the pedal on one side. After a nice ride this afternoon a close
    examination of the pedal shows one sides' locking tab is broken. As luck would have it I had
    ordered a pair this winter, so I have back ups. Counting the 850 miles on the Giro, the cheapy
    Nashbar SPD clones have given me nearly 13000 miles of service. Some times you takes your chances
    and it comes out good Spring is back today 70 degrees this afternoon and beautiful. Days like this
    remind me why I still live here. Denny in Sayre, Pa "Bent but not broken" www.recumbentstuff.com

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.