Road Cycling · Public discussion

Nite Rider batteries

Started by Dave Cannell · · Last activity · 4 posts · 611 views

Thread details

What we know about this thread

Original section
Road Cycling
Published
27 May 2005
Last activity
28 May 2005
Original author
Dave Cannell
Posts
4
Discussion status
Public discussion
Total views
611
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. I have an older (6 volt, 2-conductor) Nite Rider Extreme whose battery is
    not holding a charge. Any thoughts on replacement other than the expensive
    Nite Rider?

    Thanks, Dave
    --
    [email hidden]

  2. Dave Cannell said:

    I have an older (6 volt, 2-conductor) Nite Rider Extreme whose battery is
    not holding a charge. Any thoughts on replacement other than the expensive
    Nite Rider?

    Thanks, Dave

    Try a store that specializes in batteries. In my area we have
    "Batteries Plus".

    They will be able to tell you if you need the Nite Rider battery. I
    don't know, as I have never seen one. But I would be surprised if they
    couldn't come up with a substitute.

    Life is Good!
    Jeff

  3. Have you shocked it or cycled it? You may want to plug the charger DIRECTLY
    into the battery for about 5 minutes. Then plug the charger into the socket
    near the controller. After it says it is charging and is full, turn it on
    and leave it on until dead. It may hold a charge after this ritual.

    Good luck,

    Brian
    "Dave Cannell" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have an older (6 volt, 2-conductor) Nite Rider Extreme whose battery is
    not holding a charge. Any thoughts on replacement other than the
    expensive
    Nite Rider?

    Thanks, Dave
    --
    [email hidden]

  4. Dave Cannell said:

    I have an older (6 volt, 2-conductor) Nite Rider Extreme whose battery is
    not holding a charge. Any thoughts on replacement other than the expensive
    Nite Rider?

    I don't know if I have the same one. But under the rubber covering it looks
    like there are five AA size NiMH batteries. Since they are 1.2 volts,
    wiring in series would get the six volts. AA size NiMH now are up to about
    2300 MAh, so new batteries would last much longer than the originals. I
    have been thinking of cutting it open and seeing what I could do.

    The regular bike I now use has a hub generator and built in light. I now
    have another light I use for my Caribbean trips. So getting this to work
    isn't a high priority, though it could be useful at times.

    How much does Nite Rider want for a new battery?

    Don <www.donwiss.com> (e-mail link at home page bottom).

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.