My racing bike has or had sachs ergo shifters. knight-knight-Open ↗
toolworks.com/web_temp_pics/bike2.jpg The right side needed overhauled and I did not want any down
time on my bike. I wanted to make it so I could fix it if something went wrong. I desiced to use
some ultegra bar end shifters (wanted da and they were less but they were 9 speed) I wanted to mount
them in the downtube part of the bars. Right under the break levers. Well I could have gotten them
in there with some effort but the throw would have gotten In the way of braking. Plus they would
have been too far to reach. I borrowed some profile stoker bars that are U shaped with a upward
turn. But they were 48cm wide and they were long enough that I ended up with a nice kink in my
shoulders. I get this when I hunch down a lot or from other things. So I got some time trial bars
and a shorter stem. The old one was 100mm this one is
90. well the kink is better but not gone. Hell it's been there all weekend so it may be stress too.
knight-toolworks.combike3.jpgOpen ↗ as far as I can tell they have about ½"
or so less reach then the regular bars. So that's good. But I still have a bit of that kink. I
think the bars are higher too but one thing that I found the solution to my crotch pain was to
raise the stem a bit in the first setup. That did wonders. But this setup it is not quite as
good even with the stem set to the max height. (I think overall this setup is taller) I really
like this setup. My hands don't get tired braking is far more effective and I don't overshift. I
know what gear I am in too. I am debating on getting another stem. I can get a 60mm on with
about 30degree rise (not sure of the rise but it is less then 45 I think. That would shorten the
reach and let me raise the bars up higher. What I am not sure of is that is a shorter reach
about equal to raising the bars? I can't afford to keep spending money to figure this out.
--
Knight-Toolworks & Custom Planes Custom made wooden planes at reasonable prices See knight-knight-Open ↗
toolworks.com For prices and ordering instructions.