Greetings,
I have a Polar S720i HRM with a cadence sensor. Last week I lost the magnet
from riding which was tie-wrapped on my crank arm. I had to order a new
one. Polar told me on the phone that any magnet will work if I didn't want
to purchase a Polar magnet. For $3.50, I just went ahead and ordered it.
Has anyone used a magnet which will fit in the threaded pedal hole for the
Polar Cadence sensor?
-tom
Cycling Equipment · Public discussion
Magnet for cadence sensor?
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 23 May 2005
- Last activity
- 24 May 2005
- Original author
- Tom Nakashima
- Posts
- 5
- Discussion status
- Public discussion
- Total views
- 409
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
"Tom Nakashima" <[email hidden]> wrote in
news:[email hidden]:Quoted message said:
Greetings,
I have a Polar S720i HRM with a cadence sensor. Last week I lost
the magnet from riding which was tie-wrapped on my crank arm. I
had to order a new one. Polar told me on the phone that any
magnet will work if I didn't want to purchase a Polar magnet. For
$3.50, I just went ahead and ordered it. Has anyone used a magnet
which will fit in the threaded pedal hole for the Polar Cadence
sensor? -tom
NO but I used one of these (the 1/2" long rod) on my Campy ProFit
pedals...just epoxied in in.www.leevalley.com/hardware/page.aspx?c=1&p=42348&cat=3,42363
-
Lots of rare earth magnets will fit into your crank hole with a bit of
glue. As long as you don't try to use it for removing the pedals this
works out fine, and the magnets are usually much better than the crappy
Polar magnets. -
Some magnet materials out there are basically soft enough that you can
cut-to fit. -
"Tom Nakashima" <[email hidden]> wrote in message
news:[email hidden]...Quoted message said:
"Mike Latondresse" <mikelat@no_spam_shaw.ca> wrote in message
news:[email hidden]...Quoted message said:
"Tom Nakashima" <[email hidden]> wrote in
news:[email hidden]:Quoted message said:
Greetings,
I have a Polar S720i HRM with a cadence sensor. Last week I lost
the magnet from riding which was tie-wrapped on my crank arm. I
had to order a new one. Polar told me on the phone that any
magnet will work if I didn't want to purchase a Polar magnet. For
$3.50, I just went ahead and ordered it. Has anyone used a magnet
which will fit in the threaded pedal hole for the Polar Cadence
sensor? -tom
NO but I used one of these (the 1/2" long rod) on my Campy ProFit
pedals...just epoxied in in.www.leevalley.com/hardware/page.aspx?c=1&p=42348&cat=3,42363
Thanks to all,
I will pot a magnet in the pedal hole for my pickup to the polar sensor.
-tomDo you guys chart your workouts?
I find the charts pretty valuable when you can make comparisons in training
or just general information on your daily ride. I feel since making charts
my cycling has improved by cycling more efficiently. I am watching my diet
and calories burned closely. I have a more effective cadence in the hills
which lowers the HR. and I don't get as tired as often. The Polar S720i has
been a great tool, probably my best investment since the purchase of the
bike.
-tom
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.