machine shop bc plates?

It might not be cheap unless you have them make as many as five sets.
The cost is in the initial setup, not in the actual time the machine is
on.

Make drawings, and try to be friendly with the machinist. He will be
grateful if you come in with good drawings, but if he's nice, you may
be able to buy him lunch and ask him if there were any changes you
could make to the design or drawings that would make his life easier.
At work my boss is always b*tching about the crappy drawings people
give him, and after trying to read some of them, i can understand.

They shouldn't be hard to make. If you will accept 1/4" steel plate,
they can be made in as little as 15 min. I did mine with 1/4" steel
plate in 15 min, including the drawings and setup. The reason it was so
easy is steel plate is easily bent in what's called an ironworker. If
you choose tubes or aluminum, you will need extrusions or welds, so it
will be more costly and harder to make, but of course they will be
better plates.

--
gerblefranklin

http://gallery.unicyclist.com/Trials-Muni

Nick's main man.

"I love freedom dearly, ideally, in theory, but in reality we're not
there yet--Not nearly."--Cold Duck Complex
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/45779

You know there probably is a cheaper and faster alternitive to finding a
machinist and talking them into making plates for you for a good price,
go email Darren and get a set of his plates, he has already done all
the hard work on design and makes some killer bc plates that you can
buy without a wheel.

--
Checkernuts

No one said it was gonna be easy and I'm not afraid to try, with the
odds stacked up against me I will have to fight, One Life One Wheel got
to do it right. H2O

* -------muni militia -------
one wheeled death squad*
------------------------------------------------------------------------
Checkernuts's Profile: http://www.unicyclist.com/profile/801
View this thread: http://www.unicyclist.com/thread/45779