Road Cycling · Public discussion

Lots of punctures

Started by Email address hidden · · Last activity · 4 posts · 354 views

Thread details

What we know about this thread

Original section
Road Cycling
Published
17 April 2005
Last activity
18 April 2005
Original author
Email address hidden
Posts
4
Discussion status
Public discussion
Total views
354
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. I am getting lots of pictures recently. Could the reason be that my
    tyres are about 6 years old and have done well over 1000 miles? Should
    I buy new outers and would this help stop punctures?

    Any help welcome on this.
    John.

  2. John said:

    I am getting lots of pictures recently. Could the reason be that my
    tyres are about 6 years old and have done well over 1000 miles? Should
    I buy new outers and would this help stop punctures?

    How many punctures? Have you discovered the cause? One possibility is that
    you're not running enough pressure and your're getting "pinch flats" from
    the tire bottoming out when hitting pot holes. Or maybe there's a sliver of
    glass or wire embedded in the tire that's causing the punctures. Run you
    thumb around the inside of the tire to see if there's anything there.
    Another possibility is that the rim strip that covers the spoke holes inside
    the rim is not positioned correctly. Or maybe you just need to be more
    careful about riding through broken glass.

    A tire should be replaced when the casing is cut or when the tread is worn
    nearly to the cords (and that shouldn't happen after just 1000 miles). What
    kind of tire is it? You need to investigate a bit. Examine the tube and tire
    and try to figure out what's going on.

    Art Harris

  3. Thanks for the reply. The pressure is right, as it is marked on the
    outside of the tyre, and I pump it almost to the maximum, about 4.9
    bar, max is 5.1. I will do as you suggest re. anything inside the tyre,
    also I'll have a look at the rim strip. I've an idea it could be a
    faulty valve as this is a new inner tube. After further inspection,
    after lunch, I'll let you know how I get on.

  4. The tube had a 3 inch split on the inside. Faulty manufacture I think,
    so it is going back to the shop for a replacment.
    John

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.