rec.sport.unicycling archive · Public discussion

Light Weight Tools?

Started by Daino149 · · Last activity · 3 posts · 696 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
rec.sport.unicycling archive
Published
2 April 2004
Last activity
2 April 2004
Original author
Daino149
Posts
3
Discussion status
Public discussion
Total views
696
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–3 of 3
Posts remain in their original chronological order.

Text size
  1. I was wondering what tools you all ride with and if you have
    any tricks for keeping the weight down. For example, I’d
    like to carry a 14mm, 11mm, and 10mm socket for my cranks,
    seat, and bearing holder but the ratchet is very heavy so I
    normally don’t ride with them. Are there any lighter options
    then carrying a ratchet with enough torque for crank nuts? I
    guess something like a big allen with a 3/8” square on one
    side to accept a socket would be nice. I already have one of
    those foldup hex tools. Do you know of any with a 3/8"
    square for sockets?

    Sorry that I don’t know all the proper names for everything.

    Daniel

    --
    daino149 - How's it going, Texas?

    there ain't enough body armor in the country for me to try that. -- Ken
    on the mtbr forum in reference to MUni
    ------------------------------------------------------------------------
    daino149's Profile: unicyclist.com933
    View this thread: unicyclist.com30288

  2. I have a Lifu pedal wrench that on the other end has a 14mm
    and 15mm sockets. almost the same wieght as a pedal wrench.
    Also, if you get (I want to say...) 1/8" sockets rather than
    quarter, they can be pretty light (and will do the job for
    bearings/seat). although, i have profiles so I bring an
    allen. and a tri allen (4,5,6) I might be forgetting
    something, but it's been awhile since iv been riding and had
    the need to bring tools.

    Edit: or for a 10mm, you can get a tri 8,9,10 mil. that;s
    actually what I usually have.

    --
    Max_Dingemans - Hey Look, who's that?

    BLAH!
    ------------------------------------------------------------------------
    Max_Dingemans's Profile: unicyclist.com1981
    View this thread: unicyclist.com30288

  3. The only trick I use with tools is to match them to what I'm most likely
    to need; examples: -

    Crank nut socket wrench is heavy so I only take it if I'm
    going on a long journey or if I've just changed the cranks
    (so they are more likely to loosen).

    Tightening bearing holders and seat post clamp before riding
    should mean they stay put (it's a double bolt clamp) but the
    allen key and spanner for these are so light I generally
    take them.

    Also a bike pump for the tyre and airseat, plus a puncture
    repair kit (again cos it's so light).

    --
    onewheeldave - Semi Skilled Unicyclist

    "He's also been known to indulge in a spot of flame juggling - but it's
    the Muni that really fires him up."

    ------------------------------------------------------------------------
    onewheeldave's Profile: unicyclist.com874
    View this thread: unicyclist.com30288

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.