Australia and New Zealand · Public discussion

Hubs for 'bents

Started by David M · · Last activity · 4 posts · 442 views

Thread details

What we know about this thread

Original section
Australia and New Zealand
Published
26 October 2005
Last activity
26 October 2005
Original author
David M
Posts
4
Discussion status
Public discussion
Total views
442
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. I'm looking for a pair of hubs, or even built 20" wheels for a
    homebuilt tadpole trike. My constraints are (1) that I'm on a bit of a
    budget, (2) I don't have ready access to a lathe to modify hubs and (3)
    that I want to brake with them, either disks or drums.

    So, whats the best strategy to get these hubs or wheels? I'm in
    Perth...

    TIA
    David M

  2. David M said:

    I'm looking for a pair of hubs, or even built 20" wheels for a
    homebuilt tadpole trike. My constraints are (1) that I'm on a bit of a
    budget, (2) I don't have ready access to a lathe to modify hubs and (3)
    that I want to brake with them, either disks or drums.

    So, whats the best strategy to get these hubs or wheels? I'm in
    Perth...

    If you're not adverse to STD phonecalls, try calling
    Paul Simms from Greenspeed (or send them an email,
    www.greenspeed.com.au)
    or Peter from Cycle Science (www.cyclescience.com.au). They both
    build 'bents and will be happy to help.

    They may even lend you a beard and some long socks.

  3. Bleve said:

    If you're not adverse to STD phonecalls, try calling

    Thanks, I shall do just that. Without a recommendation I feel a bit
    wierd calling a bike builder for advice on a homebuilt...

    Quoted message said:

    They may even lend you a beard and some long socks.

    haha...when i came up with this idea last week, my wife almost fainted.
    I'm sure she has the mental image that you've conjured up. Especially
    when I started drawing the design (AutoCAD) using exhaust pipe, an old
    steel mountain bike I've got, and whatever I already have in the shed.

    Cheers
    David M

  4. David M said:

    So, whats the best strategy to get these hubs or wheels? I'm in
    Perth...

    I suppose that you've already looked on the www.ihpva.org website and
    also the various pages linked from Timothy Smith's website
    http://www.ihpva.org/people/tstrike/home.htm (TAS recumbent rider and
    long time tinkler).

    You can also ask Aldo at Quantum Cycles but Fleur wouldn't forgive you
    for delaying Aldo one minute longer in finishing her
    2-years-in-the-making recumbent. So ask Martin at the LogoTrikes
    recumbent factory in Bibra Lake. He's there on Sundays.

    Otherwise sometimes these hubs turn up on E-bay.

    I know that there's a good wheelchair sitting on the Henderson Rd
    rubbish tip, the wheels can be reused for a trike with a bit of
    adjustment. Some of the local tip operators even have a recycling bay
    where they've rescued stuff to resell cheaply.

    Most of the verge pickups have been done by now and you've to be fast
    for these anyway, there's an organised crowd how scour the verges when
    these are on (hint: lots of large rental trailers patrolling).

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.