rec.sport.unicycling · Public discussion

How high do you ride?

Started by ChangingLINKS.com · · Last activity · 4 posts · 765 views

Thread details

What we know about this thread

Original section
rec.sport.unicycling
Published
27 April 2004
Last activity
27 April 2004
Original author
ChangingLINKS.com
Posts
4
Discussion status
Public discussion
Total views
765
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. I would like to know what height off-road unicyclists put their seat.
    I am currently working on hopping and guess that my seat is still too
    high.
    To get a relative measurement that people can easily understand, please
    submit your "height PERCENTAGE."

    1. Measure from the center on the axle to the top of the seat.
    (just estimate where the seat would compress to with your weight on
    it)
    2. Measure with the end of the tape in the crotch, down to the floor
    (please rember to measure WITH riding shoes and shorts on)

    measurement 1. [divided by] measurement 2. = height percentage.

    Example:
    1. My seat height is at 31.5 inches
    2. My inseam is 38" with shoes on

    31.5 / 38 = 83%

    --
    ChangingLINKS.com - member

    Wishing you Happiness, Joy and Laughter,
    Drew Brown
    http://www.ChangingLINKS.com
    ------------------------------------------------------------------------
    ChangingLINKS.com's Profile: http://www.unicyclist.com/profile/5468
    View this thread: http://www.unicyclist.com/thread/32085

  2. I am guessing that seat is about 4.5 ft higher than my axle.

    See picture

    +----------------------------------------------------------------+
    | Attachment filename: scot_devils_elbow.jpg |
    |Download attachment: http://www.unicyclist.com/attachment/206182|
    +----------------------------------------------------------------+

    --
    scot - cyclops eating bike

    stick with what works

    ------------------------------------------------------------------------
    scot's Profile: http://www.unicyclist.com/profile/992
    View this thread: http://www.unicyclist.com/thread/32085

  3. Lets going to calculate it. When i do trials the seat is standing at the
    lowest point. I have got a 350 mm seatpost, 20 inch wheel. So 10 inch
    until the axe.

    10 inch = 25,4 cm
    350 mm = 35 cm
    total = 60,4 cm

    If i should put the seat on the real hight, it wil come betwean 10 and
    15 cm higher, so lets take 12,5 cm.

    Trial = 60,4 cm
    Freestyle = 72,9 cm
    % = 60,4 / 72,9 x 100 % = 82,9 %

    So i will come around 80 and 85 percent.

    Ferko

    --
    eenwieler - One wheel is everything I need.

    Eenwieler, Einrad, Unicycle, Monocycle. It is just the same!
    ------------------------------------------------------------------------
    eenwieler's Profile: http://www.unicyclist.com/profile/3829
    View this thread: http://www.unicyclist.com/thread/32085

  4. I ride with the seat too high. Basically. I've got a suspension post in
    which the mechanism goes all the way to the bottom, so I can't cut it
    down.

    Seat height is a very personal thing. Some like theirs extremely low,
    while others keep theirs near road height on the trail.

    The roughness of the terrain can also be a factor. If you're the kind of
    person who makes lots of adjustments, you might change it from trail to
    trail, or even throughout a ride.

    In general I'd recommend something like 10% lowering from road to dirt
    riding. Even lower for Trials. But for the most part, experiment with
    different heights and find what works best for you. Don't rely too much
    on other peoples' settings.

    --
    johnfoss - Walkin' on the edge

    John Foss, the Uni-Cyclone
    "jfoss" at "unicycling.com"
    www.unicycling.com

    "Hey, could I have some of that spinach? I need to get this pork rind
    taste out of my mouth." -- Ryan Atkins to Kris Holm, on the way back
    from Moab after sampling some of my pork rinds. They grossed out the
    whole van!
    ------------------------------------------------------------------------
    johnfoss's Profile: http://www.unicyclist.com/profile/832
    View this thread: http://www.unicyclist.com/thread/32085

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.