How do I choose a unicycle?



A

Ares

Guest
Hi!
I'm new to this. I want to buy my first unicycle. My question is: How do
I choose the right size of unicycle? Is the difference in wheel diameter
the deciding factor or is that a matter of preference? My inseam is 32",
I'm 5' 10" tall. Any recommendations as to manufacturer of a decent
beginner's make?


--
Ares
------------------------------------------------------------------------
Ares's Profile: http://www.unicyclist.com/profile/6358
View this thread: http://www.unicyclist.com/thread/32104
 
I would strongly suggest a Black Torker as the first uni. They're
inexpensive and good quality. As for size, I found it easier to learn on
a 20" wheel, then I switched to a 24".


--
Krashin'Kenny - Crash Tested

If you ain't crashing, you ain't going fast enough!!!!!!!!!!!

------------------------------------------------------------------------
Krashin'Kenny's Profile: http://www.unicyclist.com/profile/3420
View this thread: http://www.unicyclist.com/thread/32104
 
Black torker all the way. 20 or 24, I don't think there is much of a
difference in tearms of learning time. If anything, the 20 might be a
little faster to learn on, but the 24 is much faster to ride.

Daniel


--
daino149 - How's it going, Texas?

there ain't enough body armor in the country for me to try that. -- Ken
on the mtbr forum in reference to MUni
------------------------------------------------------------------------
daino149's Profile: http://www.unicyclist.com/profile/933
View this thread: http://www.unicyclist.com/thread/32104
 
You can learn on any unicycle. However, I strongly recommend a 20 as a
first uni.

Later, you can "tune it" to suit your style of riding. A fat tyred 20
can be good for a bit of muni and cross country, is idea for trials, and
a 20 is the best size for freestyle.

Also, if you decide to buy a second uni, then choosing one at the end of
the spectrum (20 is the smallest common size) means that you can choose
one noticeably different (e.g. a 28/29). If you buy a 24 first, a 20 is
only a little bit smaller, and a 28 isn't that much bigger, if you see
what I mean.

Also, if the worst happens and you hate it, a 20 will be easier to
sell.

So, I suggest, buy a 20 inch from a unicycle specialist, rather than a
local bike shop. Later, upgrade it with shorter cranksa ndbetter
pedals. Find out what you enjoy, the choose your next uni to suit your
own tastes.


--
Mikefule - Roland Hope School of Unicycling

So many pedestrians tell me I've lost a wheel.
------------------------------------------------------------------------
Mikefule's Profile: http://www.unicyclist.com/profile/879
View this thread: http://www.unicyclist.com/thread/32104
 
20" may be a little easier for the learning process, but your choice
should be more based on what you want to do with the uni once you learn
to ride it. For tricks and Trials, 20" is just right. But if you want to
go places, you'll want something bigger.

24" is a good all-around size, but still not the best if your main focus
is getting from A to B.

For more background on what you might do with various unicycle types,
check this out:
http://www.unicycle.com/Education.asp


--
johnfoss - Walkin' on the edge

John Foss, the Uni-Cyclone
"jfoss" at "unicycling.com"
www.unicycling.com

"Hey, could I have some of that spinach? I need to get this pork rind
taste out of my mouth." -- Ryan Atkins to Kris Holm, on the way back
from Moab after sampling some of my pork rinds. They grossed out the
whole van!
------------------------------------------------------------------------
johnfoss's Profile: http://www.unicyclist.com/profile/832
View this thread: http://www.unicyclist.com/thread/32104
 
just dont get a savage...the seats are so uncomfy you won't want to
ride.

-grant


--
tennisgh22

The problem with America is stupidity. I'm not saying there should be a
capital punishment for stupidity, but why don't we just take the safety
labels off of everything and let the problem solve itself?
------------------------------------------------------------------------
tennisgh22's Profile: http://www.unicyclist.com/profile/5771
View this thread: http://www.unicyclist.com/thread/32104
 
Ares wrote:
> Hi!
> I'm new to this. I want to buy my first unicycle. My question is: How
> do I choose the right size of unicycle? Is the difference in wheel
> diameter the deciding factor or is that a matter of preference? My
> inseam is 32", I'm 5' 10" tall. Any recommendations as to
> manufacturer of a decent beginner's make?

Coker, Coker, Coker, Coker...

Just kidding, learning on a Coker is for crazy people.*

Learning goes fastest on a 20".







*like me
 
You must log in or register to reply here.
Top Bottom Back