HELP! Qu-AX DB-45 E.R.D?

delcypher said:

Hi there I was in the middle of building a QU-AX 10 spline hub onto the
QU-AX DB-45 (48h) rim and I was horrified to discover the spokes are
too long 🙁.

Does anyone know what the effective rim diameter (E.R.D) of the QU-AX
DB-45 is because I think that's why I have the wrong spoke length?*
if they are only a little too long just grind them down or cut them*

- I did try and measure it myself, so I could calculate the spoke
length. I made the E.R.D 367mm (+/- 3mm), but it was very inaccurate.
NO ONE TO BLAME FOR YOURSELF ON THIS ONE

And now I'd just like to rant, a few unicycle companies annoy me so
much because they have poor technical information, like cut away
diagrams, measurments and part no.s ie. NONE!
EMAIL WAS INVENTED FOR A REASON. THEY SHOULD BE ABLE TO TELL YOU IF
YOU ASK.

Decent bike companies like Truvativ, Hope and Middleburn have them so
why doesn't QU-AX, Kris Holm, Monty or Onza (they're the worst their
main website doesn't even have their uni on it!)?

onza, monty and possibly qu-ax are bike trials companys so of course
they wont have their uni on it. and why do you need a cutaway diagram
of the rim or any other part. because especially with the rim the
design is so similiar to others...

--
torkerdx

gordito8me said:

it's like running across the highway at rush hour. Dangerous, stupid,
but not really that fun.

Unicaw89 said:

Koxx rapes Torker hard!

skianduniaddict said:

never give 4 teenagers a camera... they go crazy

------------------------------------------------------------------------
torkerdx's Profile: http://www.unicyclist.com/profile/12543
View this thread: http://www.unicyclist.com/thread/62479

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

it may be similar, but it's not the same, a few mm difference in the
E.R.D can totally screw up the spoke length as it has In my case the
spokes I'm using are at least 3mm too long.

I might just extend the thread and cut them down.

I never said I needed a cut away diagram of the rim, but other parts
would be nice like the hub and spacer arangement.

--
delcypher
------------------------------------------------------------------------
delcypher's Profile: http://www.unicyclist.com/profile/14909
View this thread: http://www.unicyclist.com/thread/62479

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com