Bike Cafe · Public discussion

Helmet post (not a troll)

Started by bikinchris · · Last activity · 1 post · 1,556 views

Thread details

What we know about this thread

Original section
Bike Cafe
Published
1 April 2004
Last activity
1 April 2004
Original author
bikinchris
Posts
1
Discussion status
Public discussion
Total views
1,556
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–1 of 1
Posts remain in their original chronological order.

Text size
  1. I Thought that some of you might want to see this:
    Bicycle Helmet Safety Institute
    The Helmet Update by Email Vol. 22, #1 -- March 31, 2004
    ---------------------------------------------------------------------

    Helmets for 2004

    We have posted on our Web site our report on Helmets for 2004.

    http://www.helmets.org/helmet04.htm

    Highlights

    In contrast to previous years, there are some new helmets this year
    that are worth looking at if you are inclined to replace yours. The
    comments below identify some actual advances in helmetry, and some
    helmets at lower price levels with improved features.

    At the high end, you still find big vents and bigger prices, with no
    verifiable improvement in safety performance. Giro is the price king
    for ordinary road helmets, with Lance Armstrong's helmet at $225.
    Target has a helmet that meets the same CPSC standard for $8.99 every
    day.

    There are at least three new promising impact foams in this year's
    helmets: an improved multi-impact EPP in the Pro-Tec skate line, and
    a new type of foam called Tau ReUp foam to be used by Shain of Italy
    that encapsulates EPS beads in EPU to provide a limited level of
    multi-impact protection. The Shain helmet is not here yet. A third
    unusual high performance foam that has finally been certified for
    both bicycle and multi-impact skateboard use is the Zorbium foam
    described in our writeup on W Helmets.

    We recommend looking for a helmet that:

    1. Meets the CPSC standard. (Look for the sticker inside) If you are
    a skateboarder as well, be sure to find one that also meets the ASTM
    F1492 Skateboard standard.

    2. Fits you well.

    And preferably:

    3. Has a rounded, smooth exterior with no snag points.

    4. Has no more vents than you need.

    We usually recommend checking Consumer Reports for brand and model
    recommendations, but their most recent helmet article in 2002 covered
    only a handful of the helmets on the market, and none of the new 2004
    models. They discovered that some of the cheaper helmets are more
    protective than the most expensive, top-of-the-line models. That
    should not be a surprise, since the cheaper ones have smaller vents
    and more foam in them, and the foam is what does the work of
    protecting your head from impact.

    Since there is no comprehensive lab test data available until
    Consumer Reports produces its next helmet article, we do not make
    brand and model recommendations. We do recommend steering away from
    models with obvious disadvantages like snag points on the outer surface.

    Most "skateboard" helmets now on the market are in fact bicycle
    helmets in the classic skate style. They are fine for bike riding, as
    long as they have a sticker inside certifying that they meet the CPSC
    standard. If you need a multi-impact helmet for aggressive, trick,
    extreme skating or skateboarding with daily crashes, look for a true
    multi-impact skate model that has a sticker inside saying it meets
    ASTM F1492. Beware of some inferior models still available in skate
    shops that only meet a European EN standard. The CPSC regulation
    covers only bicycle helmets, and there is no law that says a skate
    helmet has to meet any standard whatsoever. Fortunately the selection
    of dual-standard skate/bike helmets is expanding for the 2004 season.
    The biggest news for skateboarders is the revamping of the Pro Tec
    line for 2004 with a new foam that is a vast improvement over most of
    the older Pro Tec designs.

    Outside the US, the basic features to look for are the same. Unless
    there is a CPSC sticker in the helmet, you will probably find one
    that attests to the helmet meeting one of the numerous national
    standards or the European standard. In some cases that applies to
    even major US brands, who produce less protective models for the
    European market to make them thinner and lighter and be competitive
    there.

    What We Did Not Find Yet This Year

    There has been almost no effort to apply emerging electronic and
    wireless technologies to bicycle helmets. You should be able to find
    a helmet with a rear-facing camera and a heads-up display to replace
    your old mirror, but you can not. You should be able to find one with
    a Bluetooth wireless headset that you could use with an intercom
    system or your Bluetooth telephone, but you can not, although the
    German company Vemar is selling a motorcycle helmet equipped that
    way. The efforts to build in lights to date have been pathetic,
    although there are a few helmets with LED flashers built into the
    rear and you can always add a flasher with a hook-and-loop mount.
    Bell even sells a saddle with a powerful built in 5 LED flasher, but
    nothing for its helmets except the Metro. It looks like we will be
    waiting at least until 2005 for those things to develop.

    Designs for Women are still mostly a sham. Hold up the "woman's"
    model and the men's of the same size beside it and you will readily
    see that they came from the same mold, and the only difference is in
    colors and graphics. Only one helmet remains with a pony tail port
    (the Serfas Curva), and designers do not seem to have found anything
    more to do for women but cosmetics.

    The Web page continues with much more on interesting new 2004 models
    and a rundown of all helmet brands and models with pithy descriptions.

    http://www.helmets.org/helmet04.htm

    --------------------------------------------------------------------------

    The Helmet Update - Bicycle Helmet Safety Institute
    Randy Swart, Editor - [email hidden]
    4611 Seventh Street South, Arlington, VA 22204-1419 USA
    (703) 486-0100 (voice or fax)
    [email hidden] http://www.helmets.org

    This message was blind copied to the Helmet Update list.
    To unsubscribe, just reply and tell us to take you off the list.
    ----------------------------------------------------------------------

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.