CyclingForums
A community for cyclists, gear, training and racing.
Road Cycling · Public discussion
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
I have a question on handlebar stem measurements.
According to the nashbar glossary "stem length is measured from the
center of the stem bolt to the center of the handlebar clamp".
But is that measurement perpendicular to the steerer tube, or along the
stem (which may be at an angle).
For instance would a 0 degree 120mm stem put the handlbars futher from
the seat horizontally then a 40 degree 120mm stem, or the same distance?
Rich
On Thu, 26 May 2005 11:57:56 -0600, Rich <[email hidden]>
Quoted message said:
I have a question on handlebar stem measurements.According to the nashbar glossary "stem length is measured from the
center of the stem bolt to the center of the handlebar clamp".But is that measurement perpendicular to the steerer tube, or along the
stem (which may be at an angle).For instance would a 0 degree 120mm stem put the handlbars futher from
the seat horizontally then a 40 degree 120mm stem, or the same distance?Rich
Hi Rich, take a look at this:
http://www.habcycles.com/fitting.html
Life is Good!
Jeff
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.