Subject: fs: 60cm FGear/SSpeed/Commuter
no pictures yet; hope to barrow a digital camera for a few images-
words alone just don't do it justice. Make a serious offer if interested.
An older Peugeot frameset- 'bought at a flea-market
No idea of its' prior history; dimensions suggest Touring
Fifty-Nine.five cm C-C Top-Tube- the basis for calling it a "60cm"
Fifty-Eight.five cm C-C Seat-Tube, but lots of SPost left inside
Steel FrameSet- combination of both TIG and brazed joinery
Red w/ white logo. Condition of overall finish is Good
Neatly festooned with 9-10 Grateful Dead decals of various style
The innerds have been generously coated with Weigles' FrameSaver
Unicrown fork. F/R = Canti bosses/calipre drilling + Pannier/Fender eyelets
S-Stays have a chain hanger & .....generator mount? dunno- port side
126mm R Spacing; D-Outs long enough for several gear combo's.
down-tube and seat-tube bosses for two cages
-they're old-school Kingsberry; WHT/blk
Eng. BB Shell holding Shimano cartridge @ (?) 118mm L. sq. spindle
"Shimano 600" (FC-6207) CrankArms of 170mm L x 130mm BCD.
Steel (Sugino) DCovers- mirror polished them m'self.
Ultegra 9spd 39t Rd C-Ring (spare Salsa 39t rd C-Ring incl.); 9spd chain
ACS 16t BMX free-cog; generic 14t fixed cog
Look-style pedals; commuter 'platform-adaptors' included
Ultegra cartidge 1" threaded HSet w/ quill-adaptor for threadless stem
Salsa 120mm x 90o @ 1-1/8" Rd Stem (blk); Salsa "ProRoad" 42cm Bars
(optional 130cm x -15o AL stem avail.; blk. Both stems are 'open face'😉
Rd&Wht checkerbed vinylized bar tape over rimstrip base layer
Shimano single-pivot aero-style BLevers- lightly scratched; no gouges
Generic canti brakeset; lotta life left in the pads
standard housing under bar tape, then liner with plastic bead sheathing
(ala Nokon housing- some of which is also installed).
Novel appearance, stopping-power seems unaffected.
Blk BMX Post holding-up the wolds' sweetest saddle:
Turbo "BIO," red and white stripped; kinda 'Rising Sun.'
Overall ExCond, considering its' age- slightly scuffed; colors clear
CatEye 5-Bulb Red flasher mounted to SPost
full fender set (blk plastic w/ metal mounts) included
You're on your own for a complete wheelset, but I can get you started.
A Mavic 32 hole GL330 tubular rim w/ unglued old tire avail., gratis.
NOS Suzue flip flop 36 hole high flange hubset
f. hub includes hex nuts and 3 old school wing nuts
Buyor Ships
sorry, no paypal
If you're in a position to swap, I'm looking for
-ExCond/NOS(pref) XTR 9spd r. der. & (same cond)12-32 XTR 9spd cogset.
Mike