Cycling Equipment · Public discussion

Freehub & wheel wobble

Started by Barbour Warren · · Last activity · 5 posts · 1,014 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
25 May 2005
Last activity
1 June 2005
Original author
Barbour Warren
Posts
5
Discussion status
Public discussion
Total views
1,014
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. I have a older Shimano Sante (7sp) equipped bike with rear wheel wobble.
    Here are the characteristics:
    1) Rear wheel is true
    2) With Rear cones adjusted correctly (slight play to the hand) there is
    wobble when placed in the frame
    3) With rear cones adjusted tight the wobble goes away
    4) Cones have some wear but look fine
    5) Play is seen in the freehub (don't really have a reference to say if
    its excessive)

    My diagnosis is that I need a fresh freehub......the play in the freehub
    allows the wheel wobble unless the hub cones are adjusted tight enough to
    take the play out of the freehub.
    Sound reasonable?
    Thanks,
    Barbour Warren

  2. Barbour Warren said:


    I have a older Shimano Sante (7sp) equipped bike with rear wheel wobble.
    Here are the characteristics:
    1) Rear wheel is true
    2) With Rear cones adjusted correctly (slight play to the hand) there is
    wobble when placed in the frame
    3) With rear cones adjusted tight the wobble goes away
    4) Cones have some wear but look fine
    5) Play is seen in the freehub (don't really have a reference to say if
    its excessive)

    My diagnosis is that I need a fresh freehub......the play in the freehub
    allows the wheel wobble unless the hub cones are adjusted tight enough to
    take the play out of the freehub.
    Sound reasonable?

    more likely that the freehub is loose on the hub. Remove the axle and
    see if you can tighten the freehub with a 10 mm hexkey from the RH side
    (I might be wrong here, there were a few other designs floating around
    at that time, but in that case there is nothing you can do)

    --
    ---
    Marten Gerritsen

    INFOapestaartjeM-GINEERINGpuntNL
    www.m-gineering.nl

  3. Barbour Warren said:

    I have a older Shimano Sante (7sp) equipped bike with rear wheel wobble.
    Here are the characteristics:
    1) Rear wheel is true
    2) With Rear cones adjusted correctly (slight play to the hand) there is
    wobble when placed in the frame

    Get the QR tighter to compress the axle and take up the clearance?

    Quoted message said:

    3) With rear cones adjusted tight the wobble goes away
    4) Cones have some wear but look fine
    5) Play is seen in the freehub (don't really have a reference to say if
    its excessive)

    Freehubs nearly always have some play. The bearings are low quality but
    they don't have to carry any real loads, so it doesn't matter.

    Quoted message said:

    My diagnosis is that I need a fresh freehub......the play in the freehub
    allows the wheel wobble unless the hub cones are adjusted tight enough to
    take the play out of the freehub.
    Sound reasonable?

    Freehubs only usually need replacing when there is a failure to drive or
    a failure to freewheel.

  4. Barbour Warren said:

    I have a older Shimano Sante (7sp) equipped bike with rear wheel wobble.
    Here are the characteristics:
    1) Rear wheel is true
    2) With Rear cones adjusted correctly (slight play to the hand) there is
    wobble when placed in the frame
    3) With rear cones adjusted tight the wobble goes away
    4) Cones have some wear but look fine
    5) Play is seen in the freehub (don't really have a reference to say if
    its excessive)

    My diagnosis is that I need a fresh freehub......the play in the freehub
    allows the wheel wobble unless the hub cones are adjusted tight enough to
    take the play out of the freehub.

    If there's play with the QR clamped, the cones are not correctly
    adjusted. Until the QR is clamped, play and wobble is irrelevant
    except that the hub needs to have just enough play with the QR loose
    that it will have none with the QR tight.
    --
    Typoes are a feature, not a bug.
    Some gardening required to reply via email.
    Words processed in a facility that contains nuts.

  5. My thanks to your suggestions. It turned out to be a loose
    freehub...tightened it up, good as new.
    Barbour

    "Barbour Warren" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have a older Shimano Sante (7sp) equipped bike with rear wheel wobble.
    Here are the characteristics:
    1) Rear wheel is true
    2) With Rear cones adjusted correctly (slight play to the hand) there
    is wobble when placed in the frame
    3) With rear cones adjusted tight the wobble goes away
    4) Cones have some wear but look fine
    5) Play is seen in the freehub (don't really have a reference to say if
    its excessive)

    My diagnosis is that I need a fresh freehub......the play in the freehub
    allows the wheel wobble unless the hub cones are adjusted tight enough to
    take the play out of the freehub.
    Sound reasonable?
    Thanks,
    Barbour Warren

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.