FlightDeck shows wrong cog

I had the exact same problem with two Fightdecks and the problem lies in the connection between the
two printed circuits in the hoods.This is a known problem and in later models Shimano provide some
small adhesive pads which go under the printed circuit elements on the switch module.This is easier
to do than describe.My local bike shop gave me two small pieces and I have had no bother since.If
you are still not clear you can e-mail me ( remove' no [censored] ' ) with your address and I will send
you a photocopy of the instructions ( sorry no scanner ).I tried a couple of small pieces of Blu Tak
at first but it compressed and didn't work after a bit.

Sam Salt

"Morten" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Hi!

I have a problem with my FlightDeck computer. I've had it 2 years but this season it has started
to act very strange. It's unable to figure out which gear I'm currently using so it'll switch back
and forth showing me that

I'm

Quoted message said:

now using e.g. 2-4, now 2-3... It's very annoying since I'm almost never able to see current speed
etc. Does anyone know what might be causing

this?

Quoted message said:

Thanks in advance

Morten

---
Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗).
Version: 6.0.487 / Virus Database: 286 - Release Date: 01/06/2003