Purchased an Ergomo Pro in Dec 06, seemed great until 3 weeks ago, started reading all over the show, first under reading 60W instead of about 200W, then 350-500W when it should be about 250W. I do offset every ride now-just seems to make it worse. Any suggestions?
Power meters · Public discussion
Ergomo pro-Problems
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Power meters
- Published
- 28 April 2007
- Last activity
- 10 May 2007
- Original author
- Mamoo
- Posts
- 5
- Discussion status
- Public discussion
- Total views
- 1,577
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Mamoo said:
Purchased an Ergomo Pro in Dec 06, seemed great until 3 weeks ago, started reading all over the show, first under reading 60W instead of about 200W, then 350-500W when it should be about 250W. I do offset every ride now-just seems to make it worse. Any suggestions?
Hi Mamoo
I have just done a faor bit of testing with the Ergomo Pro - have you changed anything before the readings went haywire ? (re installed BB for example)
Is the offset the same now as it was before the problem ?
If not then I would return it to Marco Swart at Cycle Tech ASAP for a check up.
Good luck
Peter
-
I have just done a faor bit of testing with the Ergomo Pro - have you changed anything before the readings went haywire ? (re installed BB for example)
havent changed anything.
Is the offset the same now as it was before the problem ?
offset used to be around 902, now its either 920+ or around 860. I did an offset this morning-was around 860, still gave very incorrect readings-around 500 watts around the carpark, I did the offset again and it showed 920. After that I was getting readings of 1400W just turning the pedals over easily
If not then I would return it to Marco Swart at Cycle Tech ASAP for a check up.
I think thats the best option, thanks for your input -
Mamoo said:
I have just done a faor bit of testing with the Ergomo Pro - have you changed anything before the readings went haywire ? (re installed BB for example)
havent changed anything.
Is the offset the same now as it was before the problem ?
offset used to be around 902, now its either 920+ or around 860. I did an offset this morning-was around 860, still gave very incorrect readings-around 500 watts around the carpark, I did the offset again and it showed 920. After that I was getting readings of 1400W just turning the pedals over easily
If not then I would return it to Marco Swart at Cycle Tech ASAP for a check up.
I think thats the best option, thanks for your inputOffset should not vary more than a point or two after this long - something has gone wrong and sending it back is your best option as you say.
-
Mamoo said:
Purchased an Ergomo Pro in Dec 06, seemed great until 3 weeks ago, started reading all over the show, first under reading 60W instead of about 200W, then 350-500W when it should be about 250W. I do offset every ride now-just seems to make it worse. Any suggestions?
Hi Mamoo,you should definately return to the unit for a thourough check.
As said before, the offset should not vary more than 1 or 2 points.Best regards,
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.