CyclingForums
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
I'm having problems progamming Ergobrain 10s with a
Centaur 10s triple. I've changed out the inner chainring
from 30t to 26t.
After programming the chainrings I get an error message. The
manual says an may be caused by problems in the levers. But
I'm wondering if it is possible to even use the Ergobrain
with a 26t inner ring. The setup menu only goes down to 30t.
Any experience with this type of setup would be much
appreciated.
pheller-<< After programming the chainrings I get an error
message. The manual says an may be caused by problems in the
levers. But I'm wondering if it is possible to even use the
Ergobrain with a 26t inner ring. The setup menu only goes
down to 30t. >><BR><BR>
Ergo brain depends on lever position via the little doohicky
that mounts into the back of the lever. Speed and cadence
are 'wried. The chainring shouldn't matter. Program it
manually, with the 30t ring, then install onto the mount to
do the small ring, 5th cog up thing.
Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St.
Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali
costruite eccezionalmente bene"
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.