CyclingForums
A community for cyclists, gear, training and racing.
Cycling Equipment · Public discussion
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
I'm having problems progamming Ergobrain 10s with a Centaur 10s
triple. I've changed out the inner chainring from 30t to 26t.
After programming the chainrings I get an error message. The manual
says an may be caused by problems in the levers. But I'm wondering if
it is possible to even use the Ergobrain with a 26t inner ring. The
setup menu only goes down to 30t.
Any experience with this type of setup would be much appreciated.
pheller-<< After programming the chainrings I get an error message. The manual
says an may be caused by problems in the levers. But I'm wondering if
it is possible to even use the Ergobrain with a 26t inner ring. The
setup menu only goes down to 30t. >><BR><BR>
Ergo brain depends on lever position via the little doohicky that mounts into
the back of the lever. Speed and cadence are 'wried. The chainring shouldn't
matter. Program it manually, with the 30t ring, then install onto the mount to
do the small ring, 5th cog up thing.
Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.